No Stupid Questions

avoid diamonds. there are prettier (and more humane) stones. not to mention: more affordable

instead, choose a stone and metal that reflect your and your intended's personalities rather than some boring thing billions of others have.

My wife and I picked out her ring together. She has to wear it all the time. I think she should have say in the matter. Ask your partner to help you pick one out.

I spent more than I should have about 3 years ago, but I HIGHLY recommend the lab diamonds. I was able to get better quality for less price.

I looked into Moissante, and whether or not you should get that is really up to her. A doofus like me would never know it's not a diamond, but many people would. Definitely DO NOT try to pass it off as a diamond, because she'll find out one way or another. If you were proposing to me, (don't get your hopes up, I'm taken) and told me that we could save a thousand dollars by going with Moissante, I'd be all for it because I'm cheap and tradition doesn't mean much to me, but most people aren't like me.

I know it's tricky to get information without ruining the surprise, so what I did was send her a message while I was at work: "The girls here are having a debate on whether or not a fake diamond is acceptable for an engagement ring. 😂". Her response told me everything I needed to know about Moissante.

Good luck! Don't forget to invite us to the wedding!

We went with moissanite, and everyone thinks its an insanely expensive diamond

Moissanite is sparklier than diamond, so for what people look at in rings, it ends up looking better than diamond

I got our engagement rings from a gumball machine. Was really hard to find. And even harder to find one that sold rings. When I had finally found one I didn't have a single 20 cent coin it required on me. I flagged down passerby from across the street. She gave me two coins and refused to take my one Euro in exchange.

Those two coins netted me five balls, which included three rings. I selected the most beautiful and headed home.

We've been married for over 13 years so far.

From when my partner and I bought our ring set, we went to a gem shop instead of a jewelry store. We had three rings given to us by family members, and wanted to rework them into a new set for me and then get a matching ring for my husband. Every jewelry store we went to wanted $6-8k to do the rework. We ended up at the gem shop as a last resort, because we were both over it. The gem shop reworked and made my engagement ring, wedding band, added a lab grown sapphire, and found a ring for my husband for $1900 total. And they did it all on our timeframe of two weeks.

My advice is to shop around and talk to people. All the big jewelry shops were so expensive, and smaller businesses will probably be better on your budget.

Shout out to Bob's Gem Shop in Escondido, California! They got us a great deal and I love our set. 😍

I am not sure what you mean with value. Unless you are planning to resell them again, what does the value matter?

My SO and I discussed that engagement rings shouldn’t be expensive.

Correct answer. This indicates that the two of you have at least some kind of head on your shoulders.

I used a literal piece of costume jewelry for the proposal. It was very shiny, but only $10. The point of this was, we got a "real" engagement ring afterwards and she could pick what she wanted rather than me doing it for her and getting it wrong. We ultimately settled on a moissanite rock which is, it must be said, hella sparkly. And significantly cheaper than getting a diamond which she'd be forever fearful of losing or smashing out of the setting, or whatever. After visiting quite a few jewelry places, believe it or not the place where we found the one she loved was at Walmart. I still feel sophisticated to this very day.

Fellas, if your chickie is more worried about how shiny a pebble you've brought her is rather than, you know, the person bringing it, what you have yourself there is a problem.

Remember there are other precious stones than diamonds. Ruby, emerald, sapphire. For me, they're all prettier than diamonds, and have a much longer tradition.

If you can, look into local jewelers who can craft you something handmade with ethically sourced stones. I’m in Seattle and we have Valerie Madison who does great engagement sets and Everling Jewelry who uses recycled metals. A local artist will be able to recommend something within your budget, and your SO can and should be involved, as another poster mentioned.

If they've got favorite colors or colors that hold special meaning to them, prioritize gems with those colors over diamonds.

Even elaborate pieces will still be cheaper than an equivalent diamond ring because the prices are that overinflated for those things.

Also if they like purple, see if you can get the body of the ring in purple gold if it's in the budget, might not be as much of a cost conscious choice as seeking alternative gems but it'll look sick!

Diamonds are a commodity like gold and silver. You can buy market value diamonds from a dealer and then have a ring made. Even for synthetic diamonds this is the cheapest way to get a diamond ring.

I used to work at a jewelers. A good quality moissanite is gonna be as close to an actual diamond you can get without getting an actual diamond if that's what you're looking for.

As far as metals, gold is the traditional choice but sterling is both less expensive and more durable. If you do go with gold, I would opt for 14 kt over 18 kt personally. The higher the karat number, the purer the gold, which sounds like a good thing but from a practical standpoint is a bit of a PITA because this in effect means higher karats are both more expensive and more fragile because gold is soft. Since typically an engagement ring is worn every day, something that can handle some wear and tear is a plus.

For settings, look for something fairly low with prongs that have a decent heft to them. Tall settings bump into shit ALL THE TIME and eventually the prongs tens to shift and the stone goes flying (again, gold is soft).

Also, look at her other jewelry and talk to her about what her tastes are. There's no rule that says it "has to be" anything if a more standard ring isn't her thing. Going with her favorite color or her birthstone and working from there can be a good option.

I went with moissanite. It's sparklier than diamond. My wife still gets compliments on it years later.

Lab diamonds are "fake" diamonds. Artificial and natural diamonds only differ in their level of human suffering and exploitation, with natural diamonds being higher in both.

Band metal depends on taste and costs. Platinum is the most expensive and best IMO, gold is kind of out of style(does she wear gold rings?), white gold is budget platinum, silver is cheap platinum that tarnishes.

Get a lab diamond with both your birth stones flanking it. For the band, I would go with white gold unless she wears gold rings a lot or you can afford platinum.

Also, she wants an expensive ring regardless of what she told you. She wants a giant rock on her finger when she shows it off, but should be absolutely ecstatic for anything you get. Talk to her married friends' husbands and don't get a bigger diamond than they got if you want to be a bro.

I watch a youtuber who does reaction videos with her boyfriend. She said she'd rather have a blow-pop than a diamond.

Her reasoning is that blowpops are way cheaper, so you can use that money saved on your future together.

..........but maybe don't do that unless your fiancee is cool.

We got each other rings made off Etsy. Hers are a nesting set that we later bonded

Most of the time we are wearing silicone rings out

Probably different depending on region. Our engagement rings were slate white gold and platinum. When we picked out her wedding ring we first went to jewelers. Everything there was kinda ugly. No elegance, just mass-produced bulky stuff. Unless you want to cough up at least 3000€. So we checked an auction house. Found a gorgeous diamond ring from the 1930s, real elegant and you could see the craftsmanship in every little detail. And I got it for 400€. Then took it to a jeweler to size it and engrave it.

So that could be an option.

Nenya

https://www.wetanz.com/us/nenya-the-ring-of-galadriel

That was my wife's engagement ring, it was $75 at the time we bought it. Mine is a wood and titanium band that cost us $17.

I got one that has another kind of stone as the main stone with cubic zirconias around it. That sort of arrangement isn't too expensive, and more interesting than a diamond.

Don't do a plain silver band. They tarnish and cause irritation. The band should be either a metal that doesn't tarnish, or coated in one.

If it doesn't give her the ick and she likes the classic styles, used jewelry is the way to go. It's already had the "walk out of store" depreciation and I think engravings on most rings are pretty easy to replace.

As a more personal recommendation, when I ahem "outgrew" my own engagement ring and was too lazy/cheap to resize, I got a "temporary" replacement 10? years ago from here. It was supposed to be moissanite in titanium, did an XRF analysis and the band material was some sort of nickel-less maybe steel IIRC. No idea if the moissanite is genuine, but it's held up way better than any CZ has, and the band has kept better than silver so props to that.