Ask Lemmy

The comments here are interesting, as I'm helping with a project developing the software stack for mini servers we hope to sell that are preconfigured with Home Assistant (home automation) and Frigate NVR (camera control and recording) with local storage, local control, and no cloud component.

The hardware we're using for prototyping are off-lease Dell 7050 Micros running Proxmox, with 500gb Crucial MX500 ssds and an NVME Coral TPU that Frigate uses for object detection, which reduces CPU usage. 500gb is enough, because Frigate can be set to auto delete recorded clips after a set period of time, and clips can easily be saved.

Frigate can be installed via docker or as an add-on to Home Assistant. If you want to use Home Assistant, you can install Home Assistant OS directly on the SSD via these instructions.

We're using Amcrest WiFi cameras (IP4M-1041B) that connect to an on-board WiFi network controlled by an OpenWRT VM that uses the WiFi card in the system (not the ones that come with the Dells). Everything on our systems is locked down by an Opnsense firewall vm, so it should be safe to use even in an existing unsecured network.

Personally, for my own system, I've been running 4 Amcrest ethernet turret cameras (IP5M-T1179EW) for about 4 years now with no problems. You just need a cheap PoE switch (mine was $20) and then run some cables.

To use Frigate, the cameras must support both ONVIF and RTSP. Pro tip: the Amcrest Smart Home line of cameras won't work - you need a camera with a built-in web server for direct configuration.

For remote access, you could set up Wireguard (via an official Home Assistant add-on), or you could pay Nabu Casa (Home Assistant's parent company) $65/year (or 75 EUR), enter your credentials in the Home Assistant app and you're good to go, while helping fund future Home Assistant development.

If you consider alternatives beyond out-of-the-shelf, I'd recommend your own DIY IP camera. A Raspberry Pi (or something similar, such as Orange Pi), an IR camera module, an UPS and a protective shell case are the minimal hardware requirements for a cheap camera built by yourself. You'll have total control over the software, you'll be allowed to choose the OS, the software, every aspect of the camera, something that's not possible with out-of-the-shelf IP cameras.

I use cheap and cheerful cameras with Ingenic SOCs and flash an open source firmware thingino on them.

List of supported cameras increases fairly rapidly

Axis makes good (the best) IP cams, I use them commercially, they're pretty much the gold standard. Super fucking expensive though so probably not worth it for home use but you might be able to pick up something 2nd hand.

Anything that supports ONVIF. I like Hikvision for their quality, price, and web interface for setup. But don't trust any IP camera. Make sure the Mac and or IP address is blocked at your router.

There are different night visions to pick from. There's ir night vision and white led lit night vision. I prefer ir night vision because I don't want visible led lights on all night. You get a better picture at night although its black and white.

However many color night vision cameras do really well without any light source at all. I tried both and it's more of a preference so I can't say which one will work for you.

I only have the indoor one, but Reolink is fine. Used it as a baby cam. No cloud bs, supports an rtsp stream. App has gone downhill, but due to rtsp I sort of don't care.

I use amcrest with my nas

I've used a ton of ubiquity unifi cameras and they have a solid range on pricing. I think you need the unifi software to commission them though. For what it's worth they don't use the cloud for storage and don't require any sort of subscription.

I have reolink and use them with my NAS. Been happy with them!

Dahua makes good stuff. Their products are commonly sold under different generic brand names too, but they're all good

Another vote for Reolink, especially the models with ONVIF support.

I've been looking for the same thing, everything usually points to frigate being the answer, but it seems like a bit of work to get everything set up.

Probably look to secondhand commercial stuff, anything with ONVIF support should be fine.

Picked up some domed outdoor Cisco IP6630s awhile back off eBay for cheap and while not the best image wise they're built like tanks AND they give you full root access lol

All my cameras are reolink. I have their duo2 which is super wide so it captures everything, I use the doorbells and have the 360 camera in my garage. They all work with frigate and blue iris.

Axis have some really good ones. Most of them support RTSP, and many have PTZ as a bonus.

Source: I've installed a lot of them onboard ships. Axis and Samsung are the ones that handle the environment best.

Just curious: why don't you want night vision? The only time it isn't useful is if the camera will be looking through a window, cause there's too much glare when the ir lights are on.