this post was submitted on 19 Sep 2024
34 points (97.2% liked)

PC Master Race

14946 readers
1 users here now

A community for PC Master Race.

Rules:

  1. No bigotry: Including racism, sexism, homophobia, transphobia, or xenophobia. Code of Conduct.
  2. Be respectful. Everyone should feel welcome here.
  3. No NSFW content.
  4. No Ads / Spamming.
  5. Be thoughtful and helpful: even with ‘stupid’ questions. The world won’t be made better or worse by snarky comments schooling naive newcomers on Lemmy.

Notes:

founded 1 year ago
MODERATORS
 

I recently upgraded my PC from Ryzen 3600 and 3060 Ti to 5700x3d and 4080 Super. It works absolutely great, but I'm worried about the temps. Both my CPU and GPU get to about 85c max, 70-75c avarage running Cyberpunk 2077. I'm a bit worried as people report about 70-75c, not 85...

For cooling-relevant stuff, I've got a Phanteks P400S TG, 3 fans(1x120 in the back, 1x120 and 1x140 in the front) of meh quality, an absolute unit of a CPU cooler - dual tower, two fans, copper base, copper pipes, but from a local & budget (but renowned) manufacturer, the honeywell thermal pad (I know there are fakes, mine looked good but could a fake cause 10-15c temps increase?). Ambient temp is not an issue, it's at most 22c.

I'm running the GPU without any overclock or undervolt and I've applied MSI Kombo Strike 3 to the CPU.

I've got Fan Control running with auto settings, case fans to 100% at 85(either CPU or GPU), GPU to 100% at 85, CPU to 100% at 80.

If the temps are an issue, my best guess is I somehow messed up the thermal pad application, the case fans are not up to the task (especially with how the case restricts airflow from the front and the fans are only about ~1200RPM at 100%) or the GPU is pushing warm air up to the CPU. Any clues if that's an issue and if so, what's the cause?

top 10 comments
sorted by: hot top controversial new old
[–] treasure@feddit.org 19 points 1 month ago

85°C is still fine. You wouldn't want your system running at those temps all the time but if those are only spikes during intensive tasks, you're good.

If you want your PC to run a bit cooler, check your airflow, set manual fan curves, or try out a mild undervolt.

[–] empireOfLove2@lemmy.dbzer0.com 12 points 1 month ago (1 children)

Normal

Zen3 is OK to 95c TJmax, the cache would probably like to be cooler than 95 so you're fine at 85

5700x3d is not a high wattage part tho if you have a big tower cooler it should easily be under 70c l, check mounting pressure, thermal paste (do not use a pad)

[–] sodamnfrolic@lemmy.sdf.org 7 points 1 month ago (2 children)

I've got the Honeywell PTM7950 phase changing pad, which from reviews is performing as good as the best thermal pastes. I'd rather not remove it if it's not necessary as it's quite expensive but if I don't figure out another reason I'll try replacing it I guess.

[–] Telorand@reddthat.com 2 points 1 month ago (1 children)

Check your airflow. It could be that heat is building somewhere and being recycled into the intake.

Thermal Grizzly also makes a high performance pad (i.e. nothing wrong with using a properly-rated pad), so if you think yours is good, it's probably airflow related.

[–] sodamnfrolic@lemmy.sdf.org 2 points 1 month ago

Yeah, turns out removing front panel drops the temps by 10 degrees... There's a mesh variant, or rather was because it's nowhere to be found. I will ask around or buy more fans and that should do it.

[–] empireOfLove2@lemmy.dbzer0.com 2 points 1 month ago

Pads tend to be a lot more sensitive to uneven pressure ime, but I'm also old school and don't use pads over a decent paste.

[–] peopleproblems@lemmy.world 7 points 1 month ago

I'll tell you, I had a mild panic attack when I upgraded my 3700x to a 5900x and the AIO cooler said it went up 14C at rest. Zen 3 is a beast with power consumption and heat loss.

As long as it stays under 95, you're technically safe.

[–] sodamnfrolic@lemmy.sdf.org 6 points 1 month ago

Now that I think of it, there's a simple check for the case fans. I'll try removing the front cover and see if it helps the temps in a meaningful way.

[–] variants@possumpat.io 2 points 1 month ago

When I was doing benchmarks on my 2080 it would throttle down when it hit 85. I changed the GPU fan curves to always run at least at 50% and that seemed to keep ot from warming up. I used the evga precision or whatever GPU software and one of the graphs was thermal throttle so it would spike up. Not sure how the 4080 handles temps

[–] FeelzGoodMan420@eviltoast.org 1 points 1 month ago* (last edited 1 month ago)

85C on the GPU core temp for the 4080 super is unusually hot in my opinion. It's not hot enough to melt the card but that seems weird. For comparison, my case has dogshit cooling and my 4080 super FE never go above 70C core temp, even in the summer when my room was hot as fuck Maybe you just need a more aggressive fan curve? You can set one in MSI Aftervurner.