this post was submitted on 19 Sep 2024
34 points (97.2% liked)

PC Master Race

14954 readers
1 users here now

A community for PC Master Race.

Rules:

  1. No bigotry: Including racism, sexism, homophobia, transphobia, or xenophobia. Code of Conduct.
  2. Be respectful. Everyone should feel welcome here.
  3. No NSFW content.
  4. No Ads / Spamming.
  5. Be thoughtful and helpful: even with ‘stupid’ questions. The world won’t be made better or worse by snarky comments schooling naive newcomers on Lemmy.

Notes:

founded 1 year ago
MODERATORS
Brunbrun6766@lemmy.world
_MoveSwiftly@lemmy.world
Xeon@lemmy.ml
IowaMan@lemmy.world
The_Vampire@lemmy.world
CatZoomies@lemmy.world
geosoco@kbin.social
Fudgeknuckles98@lemmy.world
BobaFett26@lemmy.world
34
Is my 5700x3d overheating at 85c or is it just hot? (lemmy.sdf.org)
submitted 1 month ago by sodamnfrolic@lemmy.sdf.org to c/pcmasterrace@lemmy.world
10 comments fedilink hide all child comments
 

I recently upgraded my PC from Ryzen 3600 and 3060 Ti to 5700x3d and 4080 Super. It works absolutely great, but I'm worried about the temps. Both my CPU and GPU get to about 85c max, 70-75c avarage running Cyberpunk 2077. I'm a bit worried as people report about 70-75c, not 85...

For cooling-relevant stuff, I've got a Phanteks P400S TG, 3 fans(1x120 in the back, 1x120 and 1x140 in the front) of meh quality, an absolute unit of a CPU cooler - dual tower, two fans, copper base, copper pipes, but from a local & budget (but renowned) manufacturer, the honeywell thermal pad (I know there are fakes, mine looked good but could a fake cause 10-15c temps increase?). Ambient temp is not an issue, it's at most 22c.

I'm running the GPU without any overclock or undervolt and I've applied MSI Kombo Strike 3 to the CPU.

I've got Fan Control running with auto settings, case fans to 100% at 85(either CPU or GPU), GPU to 100% at 85, CPU to 100% at 80.

If the temps are an issue, my best guess is I somehow messed up the thermal pad application, the case fans are not up to the task (especially with how the case restricts airflow from the front and the fans are only about ~1200RPM at 100%) or the GPU is pushing warm air up to the CPU. Any clues if that's an issue and if so, what's the cause?

you are viewing a single comment's thread
view the rest of the comments
[–] sodamnfrolic@lemmy.sdf.org 7 points 1 month ago (2 children)

I've got the Honeywell PTM7950 phase changing pad, which from reviews is performing as good as the best thermal pastes. I'd rather not remove it if it's not necessary as it's quite expensive but if I don't figure out another reason I'll try replacing it I guess.

[–] Telorand@reddthat.com 2 points 1 month ago (1 children)

Check your airflow. It could be that heat is building somewhere and being recycled into the intake.

Thermal Grizzly also makes a high performance pad (i.e. nothing wrong with using a properly-rated pad), so if you think yours is good, it's probably airflow related.

[–] sodamnfrolic@lemmy.sdf.org 2 points 1 month ago

Yeah, turns out removing front panel drops the temps by 10 degrees... There's a mesh variant, or rather was because it's nowhere to be found. I will ask around or buy more fans and that should do it.

[–] empireOfLove2@lemmy.dbzer0.com 2 points 1 month ago

Pads tend to be a lot more sensitive to uneven pressure ime, but I'm also old school and don't use pads over a decent paste.