this post was submitted on 27 Jul 2023
14 points (100.0% liked)

flashlight

2928 readers
9 users here now

Portable illumination

Rules:

  1. Be excellent to each other
  2. Don't be the reason we need to make more rules

Related:

founded 1 year ago
MODERATORS
Adair21@lemmy.world
Zak@lemmy.world
14
Can any Anduril drivers measure or estimate battery or LED current? (Hardware question) (lemmy.world)
submitted 1 year ago* (last edited 1 year ago) by solrize@lemmy.world to c/flashlight@lemmy.world
8 comments fedilink hide all child comments
 

Being able to measure open circuit battery voltage is great, but it would also be useful to measure current while the light is running. That in turn can map to battery runtime and/or lumens. I wonder if any existing boards can do this, e.g. if they have adc pins connected to the relevant sense resistors. If not, it could be a cool feature in future boards.

you are viewing a single comment's thread
view the rest of the comments
[โ€“] thefreeman@lemmy.world 3 points 1 year ago* (last edited 1 year ago) (1 children)

if you have an emisar light and can disassemble it, then you can try soldering an airwire from the sense resistor to the button LED pad (sacrificing it for that) or a free ADC pin, but that's more difficult. If that cause problems with the current regulation, add a 10k resistor or the likes.
with a linear driver Iout=Iin so it's simple, with a boost driver Iin=(Vout x Iout)/(Vin x efficiency), thankfully Vin is already bein measured, Vout and efficiency need to be guesstimated.

[โ€“] solrize@lemmy.world 1 points 1 year ago

Thanks, I do have a d4v2 but that's a level of modding that I wouldn't want to do for this. I s hoping enough capability might already be in the hardware, to make accessing it into a matter of programming. Maybe I'll just go with lux measurements.