[-] spizzat2@kbin.social 97 points 5 months ago

To save you some time, it's Google's Ad Center, which the article doesn't even link to, as far as I can tell.

I'm not creeped out by any of the info I found in mine, but I am annoyed. "Yes, Google, I searched for [random thing] twice because I needed to know a little more information. That time has passed because I bought it or the event has passed or whatever. Reminding me about it just makes it weird."

[-] spizzat2@kbin.social 8 points 8 months ago

If you haven’t gotten one in a bit

I wish guidance on when to get a booster shot was more prevalent. I remember them pushing the first 3 rounds at various intervals, but it wasn't too difficult to follow if you were paying attention. Now it's just "get your COVID shot", but little-to-no mention of how often.

I know it's complicated, depending on if you've been vaccinated before, and which version(s) you got. It seems that, assuming you're an adult who has been vaccinated up to this point, it's now just an annual shot like the flu, but the CDC page mentions "the updated shot" with a long list of notes about when various versions were updated. It would be nice if it was just "if your last vaccination was more than X months ago, it's time for another".

I guess, if you have questions, the general advice of "talk to your doctor" applies.

[-] spizzat2@kbin.social 4 points 9 months ago

Unfortunately, DMCA abuse rarely has consequences for those behind it.

Oh look! The actual problem is buried at the end of the article.

It's my understanding that filing a DMCA request requires that you certify that you have reviewed the content, and confirm that you believe the content to be infringing.

Here's an excerpt from a sample takedown notice, provided by Georgetown University:

I am providing this notice in good faith and with the reasonable belief that my rights as the exclusive rights holder are being infringed.

Under penalty of perjury, I certify that the information contained in this notification is both true and accurate

I know that "reasonable belief" gives a lot of wiggle room from a legal standpoint, but c'mon. If no one pushes back on that, of course it will be abused!

[-] spizzat2@kbin.social 4 points 10 months ago* (last edited 10 months ago)

Every parking spot on the block is taken, and a handful of drivers are double-parked or stopped in front of businesses’ driveways. Others simply idle in the middle of the road.

It sounds like this is what happens when you have limited public transit and lax traffic enforcement.

“I’ve seen drivers cuss out the police. They cuss us out. They threaten to fight us,” Koral said. “We are verbally assaulted on the daily and threatened with physical violence on the daily. ... It gets scary.”

Oh, and assholes. They make any situation more shitty.

I'm not actually sure what level of public transit San Francisco has. I know they have trolleys and trains, but I'm not sure what the service area/coverage is like. It sounds like the neighborhood in question isn't covered well enough, though.

I'm not opposed to removing parking minimums, but it needs to be done in conjunction with other improvements to avoid situations like this. It's wishful thinking to enact the former, hoping that this sort of pain will force political action to enact the latter.

[-] spizzat2@kbin.social 3 points 10 months ago

How difficult was the transition? I assume you don't have to convert your media. Is it basically just setting up Jellyfin and pointing to the existing data? Is it possible to use both services simultaneously from the same multimedia location (e.g. as a transitional period)?

[-] spizzat2@kbin.social 7 points 10 months ago

That language is somewhat misleading.

That seems to be a common complaint when it comes to Texas propositions.

[-] spizzat2@kbin.social 3 points 11 months ago

"P.S. there's a celebration tonight at 6PM at Upstairs at Caroline!"

Get there early! Parking is limited! /s

[-] spizzat2@kbin.social 4 points 1 year ago

The fundamental relationship between smart-home companies and their customers is founded on trust.

Man... I'd like to be able to live in their world. In reality, it seems the fundamental relationship is based on "this is convenient and cheap enough that I'm willing to give up some privacy in that aspect of my life.", but I'd never classify it as "trust". I've had internet connected cameras. I would only ever place them outside my house. My garage door also had a camera watching it, just in case my smart garage door opener decided to act up unexpectedly.

Of course, I still have a smart phone in my pocket. I guess I've essentially given up on that front.

[-] spizzat2@kbin.social 3 points 1 year ago* (last edited 1 year ago)

how much space would one need to generate enough water for say, an average household in South Korea?

Alright, here are some "back of the envelope" calculations based on the information available. I hope I don't screw anything up, and please ignore my utter disrespect for significant figures.

The Mayo Clinical says that the average person needs about 2.7-3.7 liters of water per day. Normally, this comes from both food and beverage, so how much of that you actually need to drink is going to vary depending on your diet, but let's assume worst-case scenario, where all of your water comes from this device.

Given the stated output, and the fact that water conveniently has a density of 1kg/L, it seems that you'd need anywhere from 9-18kg (20-40lbs) of MOF to produce enough water for one person per day if this was your only source.

(1kg MOF/0.285kg water * 1kg water/1L water * 2.7L water/person = 9.5kg MOF/person)

(1kg MOF/0.210kg water * 1kg water/1L water * 3.7L water/person = 17.6kg MOF/person)

ArcGIS says the average household in South Korea is 2.4 people, so now we're at 22.8-42.2kg (50-93lbs) of MOF to meet the water requirements.

I have no idea what the density of MOF is, so I don't know how much space this would take up. Metals vary significantly in density, but we can look at Aluminum (2600kg/m^3) and Lead (11,300kg/m^3) to get some idea of range.

22.8kg * 1m^3/2600kg = 0.00877m^3

22.8kg * 1m^3/11,300kg = 0.0020m^3

42.2kg * 1m^3/2600kg = 0.0162m^3

42.2kg * 1m^3/11,300kg = 0.0037m^3

I'm struggling to come up with "real world" equivalents to help you visualize the volumes. The smallest one is a sphere about 16cm (6.3in) in diameter. The largest one is a sphere about 31cm (12.2in) in diameter.

Obviously, the device wouldn't be a sphere, and it wouldn't be made of just MOF. The diagram showed a tube of MOF wafers surrounded by a container, but that should give you a very basic idea of the materials required. Again, this is all assuming I didn't make any mistakes, which feels like a bold assumption at this point.

[-] spizzat2@kbin.social 4 points 1 year ago

I assume "slapformer" is a portmanteau of "slap stick" and "platformer". I'm intrigued, and I can't wait to check out Barnsworth.

[-] spizzat2@kbin.social 7 points 1 year ago

Midas touch in reverse

Also known as "the Mierdas touch".

[-] spizzat2@kbin.social 3 points 1 year ago

Meanwhile, this article told (reminded?) me that we have a mental health hotline service.

These missed calls are happening at a time when most Americans still aren't aware the 988 national suicide prevention and mental health hotline exists — and even as we hit the service's one-year mark, few states have established long-term funding commitments to sustain it

Plans to use some of the nearly $1 billion in federal funding for a nationwide public service campaign haven't materialized, partly due to early concerns that marketing 988 could overwhelm the lifeline past capacity.

Well, good thing they aren't marketing it. We wouldn't want 1/4 of the calls to go unanswered or anything...

"It's taken 15 years for 911 to evolve to the kind of system that it is today. We're just one year in."

I mean, a 15 minute wait in a mental health crisis still doesn't sound like an ideal goal, but I guess it's better than being completely ignored.

view more: next ›

spizzat2

joined 1 year ago