Hello everyone,
When I first installed music assistant, it was recommended to get the beta version, so I did but for some time now, I have 2 music assistant server.
Was wondering if there a reason I should keep both?
Merci pour ta réponse, je n'y avais pas pensé. Je vais essayer de les contacter
You definitely needs to calibrate your estep and flow rate as others mentioned. If numbers were correct then you might have a partial clog. If so, clean it and check Luke's hotend fix on thingiverse/printable (really worth it). https://m.youtube.com/watch?v=7tCxO17XZtw
Under extrusion aside, you can get better text details by using a smaller nozzle as one issue for the text clarity is line width, while it isn't ideal you can also try to set 0.30/0.35 line width with 0.4 nozzle.
Also, if you do plug in usb from your computer to printer (to calibrate estep), make sure to cover the 5v pin on usb cable with electrical tape. Otherwise you might wreck your printer mainboard. https://community.octoprint.org/t/put-tape-on-the-5v-pin-why-and-how/13574
Relying on 4 nvme drive for low power isn't ideal as nvme drive needs about twice more power compare to sata SSD.
L'histoire vraie d'Ersin Karabulut, célèbre artiste de bande dessinée turc.
Il raconte son histoire, mais aussi celle de son pays, la Turquie. Dans ses excellents « contes ordinaires » (fluide glacial), l’auteur nous entraînait dans une époque et un monde semblable aux nôtres, y glissant subrepticement une touche de fantastique pour mieux pointer une dérive, une aberration de notre société.
Rien de cela dans ce nouvel album : Ersin Karabulut s’ancre dans la réalité. Il parle sans détour de son parcours, celui d’un gamin amoureux du dessin avant d’être un militant ; de son pays, tiraillé par de violents antagonismes politiques et sociétaux. Ce récit sans concession – ni pour l’auteur lui-même ni pour la Turquie – est porté par un graphisme exceptionnel qui entremêle caricature et réalisme. On retrouve, car c’est une habitude chez Ersin Karabulut, la force des émotions qu’il dessine à la perfection.
Ce « journal » est la première partie d’une autobiographie aussi drôle que grave ; un manifeste pour la liberté de pensée, la liberté d’expression et la liberté de la presse ! (Tome 2 en cours d'écriture)
English version: (might not be perfectly translated)
The true story of Ersin Karabulut, famous Turkish BD artist. He tells his story, but also the one of his country, Turkey.
In his excellent “ordinary tales” works, the author took us into a time and a world similar to ours, surreptitiously slipping in a touch of fantasy to better point out a drift, an aberration in our society.
None of that in this new album: Ersin Karabulut is anchored in reality. He speaks frankly about his journey, that of a kid in love with drawing before becoming an activist; of his country, torn by violent political and societal antagonisms.
This uncompromising story – neither for the author himself nor for Turkey – is carried by exceptional graphics which interweaves caricature and realism. We find, because it is a habit with Ersin Karabulut, the strength of the emotions that he draws to perfection. This “diary” is the first part of an autobiography that is as funny as it is serious; a manifesto for freedom of thought, freedom of expression and freedom of the press!
Note: unsure this BD is available in English.
https://en.m.wikipedia.org/wiki/Ersin_Karabulut https://www.dargaud.com/bd/journal-inquiet-distanbul/journal-inquiet-distanbul-journal-inquiet-distanbul-tome-1-bda5342530
Do also have a n100 processor running proxmox with 3 VM. Can't try right now but can come back in a few days to let you know how much power it draws
Think it depends the language, in french gpt is very very close to "j'ai pété" which means "I farted". But, yeah agree that Claude ain't much better name
I don't use matrix so cannot answer with precision but you can create an automation and use vacuum state as trigger (ex: from cleaning to dock) and use notify platform to send to matrix whatever message you want
"do we straight up invade.. like we did...." Do you know the mess that actually comes from there? And How much it had enforced extremist behaviour in other countries.
"What US needs to do?" Start by taking care of your own issues like guns, they will inevitably end up in dark market serving cartels and others, it would also stop massive killing happening in your own country at the same time... Priorities to education and healthcare, Stop invading countries (can't remember last US invasion which was actually useful...), start supporting smart guys instead of bad/extremist guys so they don't get more powerful (exemple: Masoud instead of Bin Laden in Afghanistan against Russia).
"finalement assez drôle" jusqu'au moment où on s'aperçoit que des connaissances le prennent sérieusement. Et là, ça devient déprimant.
Even if it looks well sealed, it still could be humidity and popping sound usually means wet filament. That being said, you didn't mentioned if it was pla/petg... Guessing it is pla due to the temp you are using but always best to mention it. Have you watched the print ? Did it actually change temp while printing? because between 190 and 220, there is usually more difference than what you have here, especially on the bridge part.
I think it is best to first print a temp tower then some retraction test where you would stick with same temperature and variates distance and speed. You can use tools here to make it simple. https://teachingtechyt.github.io/calibration.html
If after that, you still have stringing, best is to test a new spool (or dry your spool) as too much humidity in pla will give you stringing whatever settings you use
As far as photo librabry, you can compare the different solutions at https://github.com/meichthys/foss_photo_libraries