Dangerhart

I can't compare it to the cad examples but meshmixer is definitely easier to use for small stl edits than blender, especially for things like cutting and keying parts. If you are just trying to make a pin smaller or hole larger, editing the xyz of specific points in blender may be easier depending on shape. Good luck!

I was in a simiar boat, but once I started learning it really took off and I couldn't find enough things to model/fix! I started with meshmixer, it's pretty simplified but still somewhat powerful and I think Windows only. Once I found stuff I couldn't do with it I switched to blender and now I'm much faster with it. I found there are some things each implements better so if having an issue I'll switch and try something else. I highly recommend picking one and watching youtube videos specific to what you want to change in a model

Edit: you may be able to get by on some of the connectors by lowering flow too, depends on how dialed in your printer is, everyone needs different tolerances

To add, you may not need to worry too much about setting up a firewall if your machine is behind a router/gateway that also has a firewall. There are arguments both ways, I would suggest researching that some. I did it because I could so why not, but I also only have wireguard exposed publicly so it may be over kill

I too read that it didn't work with docker but that was not my experience on Ubuntu 24.04. Maybe it's just docker desktop but I had all sorts of other issues with docker desktop and ditched it for plain docker, using lazydocker for an interface. I think one of the issues for outgoing connections at least is that IPs for the containers can change. I don't remember exactly what my setup is currently but you shouldn't have an issue opening up just specific ports mapped to a container while having default deny incoming. Not specific to containers but there are a few different Linux commands to get all ports and the processes listening on them, I used them extensively to debug my firewall setup. I can't remember them either off the top of my head but you should be able to google for your distro.

It drives me crazy that notes does not reorganize the list when you check things, but that's probably because it's just markdown. My wife also refuses to use it. Carnet is the google keep like alternative that I think would work for me, but the sharing isn't working currently, whenever the note is updated the share is removed.

Never used dockge sorry

Somewhat off topic but I've been using this lately and it's great https://github.com/jesseduffield/lazydocker. If all you want is a ui over docker this may be better than going all in on something like portainer

This is the exact opposite of my experience. We've been using codium in my org and 9/10 times it's garbage and they will not allow anything that is not on prem. I'm pretty consistently getting recommendations for methods that don't exist, invalid class names, things that look like the wrong language, etc. To get the recommendations I have to cancel out of auto complete, which is often times much better. It seems like it can make up for someone who doesn't have good workflows, shortcuts and a premium ide, but otherwise it's been a waste of time and money.

It's been a while since I've printed but I think both my sidewinder and voron do this. I don't remember having it after switching to abs. Painted on supports and wider extrusions helped a ton if I remember correctly. Good luck!

At least the song is 🔥

I can't remember if I reloaded a previous save or fast traveled out of there, but there is a way to heal down there I believe

It could be a lot of things. Temperature is a big one, are you letting the bed heat up completely for a consistent amount of time before each print, could heat be impacting your measurements, some things measure different when heated a bit? You probably aren't printing enclosed, but my voron for example expands upwards almost an entire layer over the first hour of printing. Is there an intermittent air flow that could be impacting how hot your bed really is? Have you verified there is no slop or backlash in your z lead screws and connections? I had decent results on my sidewinder using POM anti backlash nuts. Same for the stability of your measuring tool. Have you checked that it's not z tilt from turning off the motors between prints?