Machinist

674 readers

2 users here now

From Newcomers to Old Timers, a community united by the Industry of Machining

Rules Don't post illegal stuff

Don't post Porn (no sexy aluminum surface finishes don't count)

Don't be an asshat (harassment, bullying etc.)

If you're going to post NSFW stuff, flag it as NSFW, It's ok to post shop Screwups (blood/cuts) just make sure to flag it as NSFW

and Finally make sure to have a good time :D

founded 1 year ago

MODERATORS

Steamymoomilk@sh.itjust.works

Weird question, but anyone know if wire EDM can be bent at all? (lemm.ee)

submitted 1 year ago by Comment105@lemm.ee to c/machinist@sh.itjust.works

2 comments fedilink hide all child comments

I saw some clay sculpting tools and started thinking it would be sweet to cut metal with something like that. The tools I saw are apparently called pottery ribbon tools, so more of a ribbon than a wire then.

top 2 comments

sorted by: hot top controversial new old

[–] Cooldude378@sh.itjust.works 2 points 1 year ago* (last edited 1 year ago)

Wire EDM cuts exclusively in a straight line from the top head to the bottom, which can include a taper angle. The path the heads follow can be programmed to be whatever tho. I suppose something like a ribbon tool could be made for a sinker EDM but I'm not sure how well that would work. It couldn't be wire thin, but the external profile combined with a rotary head could achieve a similar result.

[–] ironeagl@sh.itjust.works 2 points 1 year ago

There is 4-axis wire EDM, where the upper and lower guides can move separtely, this is probably what you are thinking of? Or more like 6-axis?