homeassistant

12072 readers

21 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago

MODERATORS

GreatAlbatross@feddit.uk

ZigBee RGB Lightbulb w/o 3rd party app (lemmy.ml)

submitted 10 months ago by guttermonk@lemmy.ml to c/homeassistant@lemmy.world

9 comments fedilink hide all child comments

Any recommendations for a ZigBee RGB Lightbulb w/o 3rd party app - at least not a closed source app.

I heard the Phillips Hue works well but I'd like to be able to install and configure the bulbs with Home Assistant (or another open source app at a minimum). Any suggestions?

top 9 comments

sorted by: hot top controversial new old

[–] ipha@lemm.ee 13 points 10 months ago* (last edited 10 months ago) (1 children)

Hue bulbs works with home assistant without relying on the hue bridge or app. Just need a zigbee USB adapter.

Ikea also makes some decent bulbs for a fraction of the price.

[–] guttermonk@lemmy.ml 3 points 10 months ago (3 children)

Thanks for the suggestions. Do the IKEA bulbs work with HA out of the box or do they need an IKEA app?

[–] ipha@lemm.ee 5 points 10 months ago

They just work.

[–] static128@lemmy.world 5 points 10 months ago* (last edited 10 months ago) (1 children)

I'm using both IKEA and Hue bulbs without having used any of the original apps/hubs (though I do use the deCONZ/Phoscon hub addon, not the Home Assistant ZHA but if you're device is listed as compatible the experience should be the same.

Edit: apparently you can re-pair without a remote, see below comment: ~~One thing to note about the Hue bulbs (without a Hue hub) is that you need one of the remotes to reset bulbs after already being paired so they can be re-paired to a hub,~~ where as the IKEA only need the power turned off and on a number of times to enter pairing mode.

[–] jgkawell@lemmy.world 3 points 10 months ago (1 children)

I actually ran into this just the other day on some refurbished Hue bulbs. I was able to reset then without any remote or app using this method. Just make sure to do it 2-3 times in a row or until the bulbs start flashing.

[–] static128@lemmy.world 1 points 10 months ago

Thanks for the heads up

[–] Lifebandit666@feddit.uk 3 points 10 months ago

I use bulbs I've bought from IKEA and Lidl. Because they're ZigBee they're local. The "Hub' is HA because I have a ZigaZiga https://electrolama.com/projects/zig-a-zig-ah/ usb stick.

I use ZigBee2MQTT in HA to route commands to my bulbs (and sensors and plugs) which routes ZigBee commands through my MQTT broker which is also in HA.

The only app I use is the Home Assistant app

[–] solidgrue@lemmy.world 4 points 10 months ago* (last edited 10 months ago) (1 children)

I've been using the ~~Sendled~~ Sengled E11-N1EA bulbs available on Amazon for quite some time now. They have a bit of a cold white edge to them and could maybe be a bit brighter at times, but overall I've been happy with them.

Mine came in a 4-pack. I have two inside in table lamps, and two outside in coach lamps.

[–] Omacitin@lemmy.world 1 points 10 months ago

I've had 10 of the RGB ones, E21-N1EA, for a few months now and they've been working perfectly. Not the brightest or the most accurate color, but they're simple, cheap, and local-only.