this post was submitted on 27 Jul 2023
130 points (97.1% liked)

homeassistant

11998 readers
123 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago
MODERATORS
 

I've been following the project for a year now and Clemens Elflein has actually managed to get the topic off the ground professionally. Recently, his kit is available, with which you can upgrade a cheap Yardforce robotic mower to GPS support. This eliminates the need to lay boundary wires.

https://openmower.de/

top 13 comments
sorted by: hot top controversial new old
[–] jsnfwlr@lemmy.world 7 points 1 year ago* (last edited 1 year ago) (2 children)

$490 AUD for the kit, and I still need to buy the original mower to modify...

The original mower will cost $1165 AUD

So $1655 for the whole solution...

[–] Gecko@lemmy.world 1 points 1 year ago

Pretty sure it's targeted primarily at a small group of enthusiasts so with a low production volume, the high price makes perfect sense. If that's too much for you, just don't buy it :P

[–] MrFloppy@lemmy.world 0 points 1 year ago* (last edited 1 year ago) (1 children)

Are you sure with the price of the lawn mower? The "yardforce 500 classic" should cost ~300 EUR = ~495 AUD mate.

[–] jsnfwlr@lemmy.world 1 points 1 year ago

I was including the shipping cost from Germany to Perth in the cost

[–] ikidd@lemmy.world 3 points 1 year ago

If you are interested in RTK and the practical aspects of the hardware use, check out https://discourse.agopengps.com for a bunch of farmers that use it on an opensource autosteer system.

I also have a group buy running there for the Micro ardusimple units going that's waiting to hit 50 units for a substantial discount if you're in no hurry to get one for your project.

[–] XTornado@lemmy.ml 2 points 1 year ago

If only I had a yard, or a house or a flat or....

[–] jkhdkandj@lemm.ee 2 points 1 year ago (1 children)

Do you have a link to this new kit?

[–] Hazdaz@lemmy.world 2 points 1 year ago* (last edited 1 year ago)

I've been following this for a while because even though I have a small lawn, lawncare is easily one of my least favorite activities.

I also would suggest thi8s gets reposted to other tool/gardening/homeowner related subs too.

[–] christiannils@sh.itjust.works 1 points 1 year ago

Great! Thank you very much for the link!

[–] Alfiegerner@lemmy.world 1 points 1 year ago (1 children)

Very cool! I was trying to work out if you multiple rtk stations (or if that was supported) for instances when a lawn wraps around a house. Looked on discord but not clear.

[–] Chreutz@lemmy.world 3 points 1 year ago

As far as I have understood, the system just needs data from one rtk station within approximately 10 km to retain 1 cm precision. So if there already is one that close to your home with publicly available data, you might not need any rtk station at all

load more comments
view more: next ›