☕ - The hot beverage that powers the world!
Coffee gadgets - It's always great to learn about new gadgets. Please share your favorite hardware or full setups. It might inspire newcomers to experiment!
Local businesses - Please promote your local businesses. If you are not the owner of the business you are promoting, kindly ask the owner if it's okay. It would be great if the business has a physical store to include an exterior or interior shot.
Found this moka pot at a friend's relative's house, they said it's been in their family for a bit over a decade. It just broke about a week ago, but it seems like it means a lot to them. Unfortunately they're a little too old to check out how to get it fixed, so I'm thinking of doing it for them in the near future just as a gesture.
Question is, is it possible? If so, what needs to be done/replaced?
Looks like it just needs a new o-ring and a good clean.
You can buy o-rings, and to clean it you could trying giving it an overnight soak in vinegar, followed by a scrub.
The filter isn't broken by the way. That's designed to come out I think.
Thanks for confirming my suspicion with the filter
Did you get it working?
Well I haven't tried it with the silicone gaskets I ordered, but I tried another used-but-not-utterly-destroyed rubber gasket from a friend's moka pot and it seems to work fine
Sounds simple enough, thank you. I thought it would be a bigger job because they mentioned that the filter in the picture never came off before, but it doesn't have any signs of breakage. I appreciate the input.
I wouldn't reuse that particular seal/oring, though. It looks shot. The filter won't come off easily, but it should be able to gently pried off.
You say it broke relatively recently, so likely only one thing has failed. That seems to be the o-ring. As others have said, that is easily replaceable.
But ...
I think you haven't included all the parts in the photo. Or is that just it?
What is the status of the funnel where you place the ground coffee?
Also, how does the side safety valve look like? It should be on the side of the bottom compartment. The moka works with vapour pressure. A good valve is needed.
As others said, NO dishwasher. And I would also avoid much scrubbing. The moka is made out of aluminum which is a soft metal, easily damaged by acids, and with harsh scrubbing.
The funnel is fine, it was the only part that didn't look damaged so I didn't think to include it. The safety valve also looks fine, just a little dirty. Thank you for your input.
Echoing the others, this is totally fixable. I recommend buying a silicone gasket rather than the standard rubber ones they come with. My rubber gasket was obliterated within 9 months of daily use, but then I bought a pack of 3 silicone gaskets on Amazon maybe four years ago and the first one is still basically pristine.
Silicone over rubber, gotcha. Thank you
Just give it a clean and replace the rubber gasket. Should be fine. The replacement gaskets usually even come togheter with a new filter, if you don't feel like cleaning the old one.
Oh and don't put it in the dishwasher! It will completely ruin the surface and make it black and rough.
Thank you, noting all of this
The top and water reservoir look alright. I would buy a new gasket and screen. After that, it just looks like it needs a good cleaning, and possibly descaling.
Looking at the pictures closer, it looks like the stem has some greenish tarnish in it, so a good scrub and maybe some vinegar or citric acid would be in order.
Definitely some elbow grease.
Thanks, happy to learn it's recoverable
What part is broken other than that nasty gasket?
I suspected that the filter was broken because the family mentioned that it never came off before. It also has a little bit of play when I put it back in. Another comment said it's designed to come out though so I think it's fine. Thanks for your comment
Get them some cafiza. It’s for cleaning espresso machines but works great for cleaning all oily metal coffee equipment. Just get a big bowl or bucket, fill it with enough hot water to cover the parts, add a teaspoon of cafiza and let it soak for a couple hours. All the gunk should just rinse off, no need to scrub. But don’t soak the gasket.
If you have powdered oxyclean, it’s basically the same thing.
As others have said, the filter is supposed to come out. You just needs a new gasket and they’re cheap and easy to find.
The only part that really deteriorates is the rubber gasket, which needs to form a seal to keep steam from escaping. Should be able to order a replacement gasket of the same size.
The rest is just mostly thick metal and can be cleaned appropriately.
Probably about a 30 minute job to restore it, I'm thinking? Assuming you can just soak it in some CLR or something. (a common commercial de-scaling and rust-removal product)
No CLR! It will pit the aluminum. I wouldn't bother with the water chamber, that's just what aluminum looks like after the aluminum oxide builds up. 2 or 3 uses and it will look the same. If you need to descale, white vinegar or citric acid used sparingly should do the trick. Otherwise just take steel wool to it.
Good to know, thank you. Glad I didn't have to find that one out the hard way.
Get a new seal. They're like $5 and will fix that moka right up.
Those are indestructible and still being made today. I have one from the 1970's that works exactly the same as one made in the 2010's.
Here is the manufacturer site where you can buy replacement seals: https://www.bialetti.com/it_en/moka-express.html
Manual: https://www.bialetti.com/media/manual/caffettiere/MOKA_EXPRESS-manual.pdf
Parts: https://www.bialetti.com/it_en/set-of-3-gaskets-and-1-filter-holder-for-4-cup-model.html
It’s clearly past it’s 2010 expiration date on the bottom…
(JK these things last forever)
Also, after you clean it up, run a few brews through because the cleaning can bring out some bad aluminum taste that a seasoned moka pot coated with oils doesn’t have.