https://a.co/d/hKla5qi This screws over the switch but it's a single button.
this post was submitted on 05 Sep 2023
4 points (100.0% liked)
Home Automation
2951 readers
4 users here now
Discussion about general home automation ideas and projects, home automation protocols like Z-wave, Zigbee, Matter, etc, and home automation software and hubs like HomeSeer, Home Assistant, OpenHAB, Homey.
founded 1 year ago
MODERATORS
That might be the best option I have until I finish my Hal9000 project.
I know this one isn't ideal but something similar to this?
https://www.homedepot.com/p/Light-It-White-Wireless-RC-Switch-30019-308/206857908
What if it was a door activated switch like a fridge so the light only comes on when the door opens?
That.. Isn't the worst idea. My HA server is close to all of them, so I would just have to add a RF blaster.
And I thought about the momentary switch, but it would be a PITA to wire it so that the wires were hidden.
Why look for something so complicated when you could use a momentary switch that is activated by the door to the closet? Basically like the light in your fridge.
I don't want to have to run wires since our attic is a nightmare (blown in insulation 3ft deep), and I don't want wires just running in the open.
What I'm looking for really isn't super complicated. It could easily be done by Lutron or someone making a few small changes to a motion light since they already have the firmware to select shutoff times.
Look for one for a bathroom exhaust fan and just wire it up to lights instead
We use simple, cheap motion detector bulb sockets for our closet lights. Open the door light goes on, close the door, light will eventually go off.
Many of our closets have had their doors replaced with curtains, and the solution works just as well.
Even the cheapest motion-detection sockets have a configurable sensitivity and timeout.
While we’re all-in on home automation (conditional everything including heat pumps and lighting) the closets were a case of “simple is better).
Otherwise I second the recommendation for the bathroom fan timer.
I knew I was over thinking things, and the solution would be a super simple product. Thank you!