this post was submitted on 27 Jun 2024
14 points (93.8% liked)
Linux
48186 readers
1222 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Swap em around if they’re the same interface.
What do you mean by swap them around, and what do you mean by interface?
by swap them around i mean physically take the two drives out and put them in each others connectors. by interface i mean physical interface, like the plug or socket or slot they connect to the motherboard with.
the bios usually enumerates drives based on their position on the bus, so switching the connector they're plugged into would fix the problem.
linux usually handles drives based on uuid, a unique identifier per device, so it wouldn't mess up linux.
you didn't specify if one was like a sata or esata or nvme and the other was different so i had to qualify "if theyre the same interface".
Just a quick question, will I need to do this every time I want to boot into a different OS?
No, just to install windows on the right drive. It doesn’t matter after that.
Oh thanks. I swapped them, the new Drive doesn't show in the boot menu but it is marked as a higher number than the the old one. Will windows install to the new drive?
The new drive probably doesn’t show in the boot menu because it doesnt have a partition table or anything.
Are both drives the same size? What I’m trying to figure out is would you be able to recognize when the windows installer is trying to install to the wrong drive.
The drive is formatted, but it has no data on it. They're both the same size
As long as you have some way of recognizing which is which in the windows installer so you don’t accidentally wipe your existing drive.
If you’re worried, just pull the one you don’t want wiped out of the system while you’re installing.
Oh that makes sense. They're both nvme of the same size so I could do that. Thanks! I'll give an update