this post was submitted on 26 Jun 2024
125 points (97.7% liked)

Climate - truthful information about climate, related activism and politics.

5394 readers
146 users here now

Discussion of climate, how it is changing, activism around that, the politics, and the energy systems change we need in order to stabilize things.

As a starting point, the burning of fossil fuels, and to a lesser extent deforestation and release of methane are responsible for the warming in recent decades: Graph of temperature as observed with significant warming, and simulated without added greenhouse gases and other anthropogentic changes, which shows no significant warming

How much each change to the atmosphere has warmed the world: IPCC AR6 Figure 2 - Thee bar charts: first chart: how much each gas has warmed the world.  About 1C of total warming.  Second chart:  about 1.5C of total warming from well-mixed greenhouse gases, offset by 0.4C of cooling from aerosols and negligible influence from changes to solar output, volcanoes, and internal variability.  Third chart: about 1.25C of warming from CO2, 0.5C from methane, and a bunch more in small quantities from other gases.  About 0.5C of cooling with large error bars from SO2.

Recommended actions to cut greenhouse gas emissions in the near future:

Anti-science, inactivism, and unsupported conspiracy theories are not ok here.

founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
[โ€“] 0110010001100010@lemmy.world 11 points 6 months ago (1 children)

It's actually a really cool concept honestly. I do this on a very tiny scale at home. I run a small server cluster largely as a playground but also for things like Plex and Vaultwarden. The waste heat from that is pushed out the back of the rack and a heat pump water heater a few feet away uses that to help heat water.

As you said, seems like there are many opportunities to do this on a much lager scale.

[โ€“] OminousOrange@lemmy.ca 5 points 6 months ago

Nice, I have much the same setup in my house!

I visited the recently Passive House certified student residence buildings at the University of Victoria, and the heat recovery there is quite interesting. Passive House requires a very low heating load, so they recover all the heat they can from the commercial kitchen (the presence of which is rare in a Passive House because of high ventilation requirements) processes such as ventilation hoods and refrigeration systems and put it into the DHW system.

They had to get a bit creative with the design, but it's really not that complicated. More just not doing things the way they've always been done.