homeassistant

12009 readers

138 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago

MODERATORS

GreatAlbatross@feddit.uk

Full local/open source lawnmower? (lemm.ee)

submitted 6 months ago by jkhdkandj@lemm.ee to c/homeassistant@lemmy.world

11 comments fedilink hide all child comments

Anyone have any current recommendations for an open source (or one that works without internet) robot lawnmower?

I've got 1,300m3 of grass around my house and it's been a pain to cut with a push mower.

So far I've only seen:

My issue with the openmower one is that I don't know how to solder and I'm too afraid I'll break some very expensive components, so it would be nice if I could buy something mostly pre-built.

As for repalmaker, I worry not having GPS won't work since my garden is quite large and a robot bouncing around randomly would probably never finish, I also have a separate front and back (there's a path between them) and I'd like the robot to finish one area then, go to the other area by itself.

Anyone seen any other options available?

you are viewing a single comment's thread
view the rest of the comments

[–] seathru@lemmy.sdf.org 5 points 6 months ago

The biggest hurdle I've ran into is that GPS resolution just isn't accurate enough. If you want something that can follow a planned route without having to rely on a bunch of obstacle avoidance (which is difficult enough in itself) then you'll have to set up some sort of local RTK in conjunction with the GPS.

Currently I'm just setting my mower up like a FPV drone that I can drive around remotely from the comfort of air conditioning. Hoping someone comes out with a good automated solution.