this post was submitted on 12 Apr 2024
26 points (88.2% liked)

homelab

6602 readers
2 users here now

founded 4 years ago
MODERATORS
 

I want to build a proper server with room for 40+ HDDs to move my media server to and have RAID 1. I know a lot about PCs and software, but when it comes to server hardware I have no clue what I'm doing. How would I go about building a server that has access to 40+ RAID 1'd HDDs?

you are viewing a single comment's thread
view the rest of the comments
[–] toikpi@feddit.uk 1 points 7 months ago

My guesstimate is you have around 1,400 4K DVD rips. Do you need all of them?

You probably should look at RAID 6 with a cold spare (i.e. a drive sitting alongside the server.

ZFS allows you to create spare disks. ZFS spare disks are hot spares which are swapped in for faulty disks and swapped out when you replace the faulty disk.

I suggest that you calculate the cost to build this server, you should allow for NAS specific drives rather than the cheapest desktop drives.

You will need PCI to SATA cards to connect you drives.

I suggest that you look at the NAS builds on PC Part Picker.

Have a look at these pages

https://www.wundertech.net/diy-nas-build-guide/ https://nascompares.com/guide/build-your-own-nas-in-2024-should-you-bother/ https://www.storagereview.com/review/how-to-build-a-diy-nas-with-truenas-core

Finally check how much power and heat the server will produce. A server with that many drives will loud.