265
this post was submitted on 30 Mar 2024
265 points (98.9% liked)
Linux
48033 readers
1309 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
For me, I only got to 5 Gbps or so on my NVMe using dd and fine tuning bs=. In second place there was steam with ~3 Gbps. The same thing with my 1 Gbps USB Stick. Even though the time I saved by more speed is more than made up by the time it took me to fine tune.
Sorry for the nitpick, but you probably mean GB/s (or GiB/s, but I won't go there). Gbps is gigabits per second, not gigabytes per second.
Since both are used in different contexts yet they differ by about a factor of 8, not confusing the two is useful.
I think it is gigabits per second, but to be clear: Whatever dd reports as speed after finishing (or with status=progress)
That's in bytes. A modern NVMe drive can do about 7 GB/s (more than 10 for PCIe 5.0 drives). Even SATA could handle 5 Gbit/s, though barely.
Yup, my PCIe NVMe should be readable at 8 GB/s and writeable at 7 GB/s afaik. I can't reach that speed tho, no matter which bs.