this post was submitted on 04 Mar 2024
6 points (100.0% liked)

Self Hosted - Self-hosting your services.

11444 readers
35 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules

Important

Beginning of January 1st 2024 this rule WILL be enforced. Posts that are not tagged will be warned and if not fixed within 24h then removed!

Cross-posting

If you see a rule-breaker please DM the mods!

founded 3 years ago
MODERATORS
 

Hi, I'm running the Nextcloud snap on my dad's 12 year old laptop (hp elitebook 8470w) but it has some performance issues. It fails to load for half a minute pretty often.

I'm considering buying a rPi 5 instead to run a few things:

  • umami.is or similar simple web analytics
  • Nextcloud with memories.gallery to store all my family photos
  • maybe HUGO to build websites
  • possibly listmonk to send emails later

Another positive could be the lower power draw, but I'm not sure one pi5 is strong enough to run these.

What I'd need help with is the SMART results of the laptops HDD:

Getting these kinds of errors:

[451080.136193] ata1.00: failed command: WRITE FPDMA QUEUED 451080.136235] ata1.00: cmd 61/08:08:80:07:4a/00:00:10:00:00/40 tag 23 ncq dma 4096 out [ [451080.136235] res 40/00:ff: 00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) 451080.136352] ata1.00: status: { DRDY } [ [451080.136385] ata1.00: failed command: WRITE FPDMA QUEUED 451080.136427] ata1.00: cmd 61/08:00:90:07:4a/00:00:10:00:00/40 tag 24 ncq dma 4096 out [ [451080.136427] res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout) [451080.136543] ata1.00: status: { DRDY } [451080.136577] ata1.00: failed command: WRITE FPDMA QUEUED [451080.136619] ata1.00: cmd 61/08:c8:28:08:4a/00:00:10:00:00/40 tag 25 ncq dma 4096 out [451080.136619] res 40/00:01:c8:7f:d5/00:00:10:00:00/e0 Emask 0x4 (timeout) [451080.139084] ata1.00: status: { DRDY 3 }

And I couldn't make sense of the smartmontools long test results for the HDD:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 6799 (249 70 0)
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4753
170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 76
183 Runtime_Bad_Block 0x0032 100 100 010 Old_age Always - 8
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 76
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always -5 59312
226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 65535
227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 48
228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 65535
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 559312
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 523233
249 Unknown_Attribute 0x0013 100 100 000 Pre-fail Always - 160
```98
you are viewing a single comment's thread
view the rest of the comments
[–] poVoq@slrpnk.net 3 points 8 months ago* (last edited 8 months ago)

It might be the SATA controller that has an issue, hard to figure out. In that case you will probably have no choice but to replace the hardware. But IMHO in nearly all cases an old laptop is more convenient for beginner self-hosting than a RPi.