this post was submitted on 01 Mar 2024
206 points (93.6% liked)

science

14786 readers
50 users here now

A community to post scientific articles, news, and civil discussion.

rule #1: be kind

<--- rules currently under construction, see current pinned post.

2024-11-11

founded 1 year ago
MODERATORS
 

In the study, scientists put the three plastic compounds into ‘hard water’ — a common type of U.S. freshwater that contains high levels of calcium carbonate and magnesium

When the plastic-containing water was boiled, these calcium carbonates formed tiny clumps around most of the microscopic plastics, trapping them within and rendering them harmless.

The report comes with significant caveats, however.

Scientists only looked at three of the most common — and in the case of polyethylene and polypropylenes, the safest — plastic polymers. They didn’t look at vinyl chloride, for example, a compound of serious concern last month’s study found in bottled water.

Boiling also didn’t manage to remove all of the polymers.

you are viewing a single comment's thread
view the rest of the comments
[–] echutaa@programming.dev 11 points 8 months ago (1 children)

Seems like a lot of work compared to just using an ro filter, but I also live in an area where you shouldn’t drink the tap because of the crap they put in it.

[–] XTornado@lemmy.ml 2 points 8 months ago (1 children)

the crap they put in it.

As in actively put in??? Or as in industries or similar dumping stuff into the river or similar?

[–] echutaa@programming.dev 3 points 8 months ago (1 children)

Yea they intentionally add chloramines which have a range of health issues, but it kills the biohazards so they do it to prevent outbreaks of waterborne diseases.

[–] XTornado@lemmy.ml 1 points 8 months ago (1 children)

Ah ok. Isn't that super common? Or they put very high levels where you are?

[–] echutaa@programming.dev 1 points 8 months ago

I think it is pretty common, they definitely push the limits on what should be used in my area. Last year I used tap run through a sediment and 2 carbon blocks to fill a small pond and the ammonia levels through that were above 10mg/l, I didn’t bother diluting to get the actual level since that’s already exceptionally toxic for anything with aquatic animals.