ErgoMechKeyboards

5857 readers

2 users here now

Ergonomic, split and other weird keyboards

Rules

Keep it ergo

Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)

i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²

¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid

No Spam

No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.

No Buy/Sell/Trade

This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.

Some useful links

EMK wiki
Split keyboard compare tool
Compare keycap profiles Looking for another set of keycaps - check this site to compare the different keycap profiles https://www.keycaps.info/
Keymap database A database with all kinds of keymap layouts - some of them fits ergo keyboards - get inspired https://keymapdb.com/

founded 1 year ago

MODERATORS

Debating which split keyboard to get (lemmy.world)

submitted 1 year ago by hannadryad@lemmy.world to c/ergomechkeyboards@lemmy.world

11 comments fedilink hide all child comments

Reposting this on what is probablty the correct community, which I didn't know actually existed on Lemmy until five minutes ago .....

I’m humming and hawing over which split 36-key or thereabouts keyboard to get, either pre-soldered or as a kit to do the soldering myself (which would be an adventure because it has been a minute).

I’m pretty sure I want five columns not six, because I don’t see the point of giving my pinky extra work. I’m not sure about giving my thumb two or three keys for layers. Three keys would probably give me more options but I don’t want to get all layered out, you know?

Any thoughts on that? I know there is huge potential for going down the rabbithole here but assuming I get one keyboard, would I be better getting more rather than less - six columns - to play with layouts and layers? Or just go with my gut and get 5x3+2 right at the start?

PS: Does anybody know if Beekeebs 36-key Piantor case fit the 36-key PCB snugly? Or is it just the 42-key case with a big gap where the extra PCB has been broken off?

you are viewing a single comment's thread
view the rest of the comments

[–] kukkurovaca@lemmy.blahaj.zone 1 points 1 year ago

I'm a big fan of the Kyria/Hillside layout, personally. I prefer having an outer pinky column personally, but that's down to preference and individual anatomy. Some boards do allow you to break off the extra column, so there's no reason you couldn't try 6-column first and then break off the column later.

You also don't necessarily nead to get a case right away or at all, lots of folks use split keyboards as bare PCBs. You can use thin adhesive foam to cover the bottom of the board and trim it to fit, if you need to use it on a bare desk and don't want to scratch anything. If it's a soldered build, you also don't need a plate. (Hotswap, a plate is pretty beneficial)