networking

2811 readers

1 users here now

Community for discussing enterprise networks and the ensuing chaos that comes after inheriting or building one.

founded 1 year ago

MODERATORS

manifex@sh.itjust.works

Trying to connect two routers (lemmy.world)

submitted 11 months ago by WhyAUsername_1@lemmy.world to c/networking@sh.itjust.works

10 comments fedilink hide all child comments

Hi all!

I have 2 ISPs with their own routers.

Router A: 192.168.0.1/24

Router B: 192.168.20.1/24

I have my servers plugged into Router A and all my endpoint and users' devices connected to Router B.

I want users connected to Router B (192.168.20.1/24) to have access to server 192.168.0.90

I thought plugging a LAN cable and connecting Router A and Router B and then defining static routes in both routers would solve the issue.

However, at the first step itself I have an issue. When connecting the routers via a LAN cable, both routers dont get any IP.

I was also referring to this post on superuser. Though Router B is capable of creating subnet and static route, I am not sure if Router A (Archer XR500v) is capable of creating a subnet and/or a static route.

https://superuser.com/questions/1667068/connect-two-routers-with-different-subnet

you are viewing a single comment's thread
view the rest of the comments

[–] supernicepojo@lemmy.world 16 points 11 months ago (1 children)

You are going down a road of headaches here. Do you absolutely have to use this hardware to complete this setup? If not please consider getting a dual-wan load-balancing router. Cisco makes a nice one, tp-link has a fairly cheap version too. You can use the provided routers behind a firewall as better wireless AP nodes.

[–] sugar_in_your_tea@sh.itjust.works 5 points 11 months ago

Yeah, this looks like consumer grade crap. I'm a simple home user, and I've found a lot of value in entry level enterprise gear (Mikrotik router, Ubiquiti AP).

OP, if your org is big enough to need two ISPs, you're big enough to buy enterprise hardware. It doesn't need to be expensive, for example this TP-link router can do up to 3 WANs (~$60 on Amazon) and I use the Mikrotik Hex S (~$70; it can do at least two). Separate your router and AP and you can upgrade each independently as needed. That said, configuration will be more complicated (esp for my Mikrotik, not sure amor TP-Link) since they're designed for power users, but there are lots of good guides online.