My Print won't stick to the Bed[SOLVED] (lemmy.world)

submitted 10 months ago* (last edited 10 months ago) by Roflmasterbigpimp@lemmy.world to c/3dprinting@lemmy.world

30 comments fedilink hide all child comments

Thank you all for your help! After yesterday's Input I managed to Print my Box! The Problem was (mostly) the Bed temperature! The lower Bed temperature (60°C) and the now successful Firmware-Update (special thanks to DABDA) done the trick!

Thank you all for your help and your advice!

Hello I'm very new to 3D printing, I'm using a Sovol 06 with 1.75mm PLA. I'm trying to print a Box (for MTG-Cards). But everytime the bottom of the Box starts to "deatche" itself from the Bed. It starts with one corner and then progresses to the whole print. The Nozzle temperature is 200°C and the Bed temperature is 80°C. Can someone help?

you are viewing a single comment's thread
view the rest of the comments

[-] DABDA@lemmy.world 6 points 10 months ago

Awesome, glad to hear it!

When you're ready to try printing again I agree with the suggestions to:

lower the bed temp to ~60c
avoid using glue sticks or similar since it shouldn't be necessary with PLA, and will just add another variable
keep working through first layer print tests

I'm surprised you're having adhesion problems with a PEI build plate. When I swapped to PEI it was like magic; filament effortlessly sticks and finished prints pop off from a gentle flex. There isn't like a plastic shipping cover on it or something is there?

Anyway, good luck with the rest of your troubleshooting -- I'm sure you'll eventually get it dialed in :)

this post was submitted on 26 Nov 2023

32 points (100.0% liked)

3DPrinting

15330 readers

198 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

j4k3@lemmy.world

andypiper@lemmy.world

henry_rowengartner@lemmy.world

GrayBackgroundMusic@lemm.ee