32
My Print won't stick to the Bed[SOLVED] (lemmy.world)
submitted 10 months ago* (last edited 10 months ago) by Roflmasterbigpimp@lemmy.world to c/3dprinting@lemmy.world
30 comments fedilink hide all child comments

Thank you all for your help! After yesterday's Input I managed to Print my Box! The Problem was (mostly) the Bed temperature! The lower Bed temperature (60°C) and the now successful Firmware-Update (special thanks to DABDA) done the trick!

Thank you all for your help and your advice!

Hello I'm very new to 3D printing, I'm using a Sovol 06 with 1.75mm PLA. I'm trying to print a Box (for MTG-Cards). But everytime the bottom of the Box starts to "deatche" itself from the Bed. It starts with one corner and then progresses to the whole print. The Nozzle temperature is 200°C and the Bed temperature is 80°C. Can someone help?

you are viewing a single comment's thread
view the rest of the comments
[-] Wutchilli@feddit.de 2 points 10 months ago

Have you leveld the bed allready, it needs to have the right distance to the nozzle everywhere.

[-] Roflmasterbigpimp@lemmy.world 1 points 10 months ago

I've used the auto leveling, so I guess it is leveled(?)

[-] Wutchilli@feddit.de 2 points 10 months ago

Two questions: how high is the nozzle away from the printbed when you Print the First layer and have you done a Testprint to check the bedlevel

[-] Roflmasterbigpimp@lemmy.world 2 points 10 months ago* (last edited 10 months ago)

I've printed a Benchy which worked very well. And the Nozzle is almost touching the Bed. The Manual said if I can barely shove a Piece of A4 Paper between Nozzle and Bed that would be fine so I did that

[-] Wutchilli@feddit.de 1 points 10 months ago

Maybe you can Print something Like this First layer Test (https://www.printables.com/de/model/252059-perfect-first-layer-test) so we can get a closer Look at your First layer

[-] Roflmasterbigpimp@lemmy.world 2 points 10 months ago

Ive actually started another attempt with lower speed and I "loosend" the PLA from the Coil so it can be passed down more easily. If that fails I will print this test. Thank you :D

this post was submitted on 26 Nov 2023
32 points (100.0% liked)

3DPrinting

15330 readers
198 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
j4k3@lemmy.world
andypiper@lemmy.world
henry_rowengartner@lemmy.world
GrayBackgroundMusic@lemm.ee