this post was submitted on 24 Nov 2023
20 points (100.0% liked)
Linux
48224 readers
981 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I overclocked my RX580 recently. Here is how to do it in CoreCTRL.
https://gitlab.com/corectrl/corectrl/-/wikis/Setup
Currently, to have full control of your AMD GPU while using the amdgpu driver, you need to append the boot parameter amdgpu.ppfeaturemask=0xffffffff to your bootloader configuration and reboot. NOTE: The following instructions are for guidance only. Check your distribution documentation on how to add boot parameters.
GRUB bootloader Edit the file /etc/default/grub as root and append amdgpu.ppfeaturemask=0xffffffff to GRUB_CMDLINE_LINUX_DEFAULT:
GRUB_CMDLINE_LINUX_DEFAULT="... amdgpu.ppfeaturemask=0xffffffff"
NOTE: In the above example, ... represent other existing parameters. Do not add ... to your GRUB_CMDLINE_LINUX_DEFAULT. You should only add amdgpu.ppfeaturemask=0xffffffff. Then regenerate the bootloader configuration file with the command:
sudo grub-mkconfig -o /boot/grub/grub.cfg
Reboot your system. You should have more controls when you select Advanced as Performance mode where you can tweak the mhz and voltage easily.
I did this and i can tweak the voltage and stuff. Just max memory is wrong. On amd adrenalin i was running vram 2124mhz and here only 1075mhz. And how does the voltage work in CoreCTRL i only know how to do it in amd app in mv but i dont know what -30 is.
In CoreCTRL, you tweak the voltage for each state. -30 in your case would reduce the voltage by 30 mv in every state which is not ideal. Just deduct 30 mv in each state in CoreCTRL.
For the 6000 series amd gpus corectrl can only offset the voltage and not control each voltage step like adrenalin can. The -30 would probably be a 30mV reduction to the gpu voltage, but it should tell you exactly what you're doing.