3DPrinting

15591 readers

12 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

j4k3@lemmy.world

andypiper@lemmy.world

henry_rowengartner@lemmy.world

GrayBackgroundMusic@lemm.ee

Unable to print PLA (lemmy.world)

submitted 1 year ago by Fabrik872@lemmy.world to c/3dprinting@lemmy.world

15 comments fedilink hide all child comments

Hello all,

I have had Prusa MINI for a few years already and I have printed PLA without an issue but recently I have printed only PETG for some time I got through multiple spools of PETG without any print in PLA. But after I tried to print PLA my extruder kept skipping and grinding filament and when I tried to feed filament by hand it went easy for a little bit but after that, it went very hard as if the filament was cold so I tried to bump up the temperature to 235C and it helped a little bit but on faster sections of print like the infill extruder is skipping again. I don't think I have unreasonable speeds i am using a standard Prusament PLA profile with Prusament PLA. I have also tried PLA+ from some different brand with the same result. Then I changed the nozzle from an E3D hardened steel nozzle with nano coating to brass (not new I have printed PETG on this one as well) still with the same result. PETG is printing fine. Is there something I can try, please? I am out of options.

you are viewing a single comment's thread
view the rest of the comments

[–] grayman@lemmy.world 8 points 1 year ago (1 children)

You've got a jam. Filament is dried and burnt up in there. PETG is a lot more fluid / lower viscosity when hot, so it's flowing around the crusty. Take off nozzle, remove PET tube. You should have another PET tube in the spares bag that came with the printer. Clean out the extruder well.

[–] Fabrik872@lemmy.world 3 points 1 year ago (3 children)

I did have nozzle cleaned but my ptfe tube is totally melted and i lost the spare so i flipped it and it did helped a lot i have managed to print something without a fail but still only at high temperature 235C so i had a lot of strings so tomorow i will try to find the replacement i hope it will fix it

[–] rambos@lemm.ee 3 points 1 year ago

Its weird for all metal hotend. Not sure how assembly looks exactly, but make sure your hotend fan is working properly.

At least you found a problem

[–] ShadowRam@kbin.social 2 points 1 year ago

Yeah, that's bad.

What extruder are you using that has PTFE tube that close to hotend? and want to print that high temperatures?

I wouldn't go above 220C unless its a proper all metal hotend.

[–] Sphks@lemmy.dbzer0.com 1 points 1 year ago

cut it with a sharp knife ?