Linux

48224 readers

911 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

AgreeableLandscape@lemmy.ml

nooter692@lemmy.ml

MarcellusDrum@lemmy.ml

cypherpunks@lemmy.ml

cyclohexane@lemmy.ml

d3Xt3r@lemmy.nz

I've upgraded my GPU. And could use some help... (lemmy.one)

submitted 1 year ago by empireOfLove@lemmy.one to c/linux@lemmy.ml

14 comments fedilink hide all child comments

I use the MX Linux distribution (Debian-based) as my dual-boot. Recently, I've started building a new PC, the crux of which will be a Radeon RX 7900xtx GPU. Since it showed up before everything else, I crammed it into my current PC to replace a GTX970 to test and play around.

After some fun with the Dell BIOS not giving me any video out, I got it running great in Windows. However, when booting into MX Linux, the system simply hangs on a flashing cursor forever. If I press the power button, it shows the normal shutdown text of stopping services and shuts down fine, so I know it's not a hard crash, just a silent hang.

I'm assuming this is related to the NVidia drivers being embedded in the kernel or something and it just can't figure out how to initialize the Radeon card? I was using the NVidia proprietary drivers on my GTX970 before, installed through the MX Linux repos.

Any advice or guides you might have to get this install working again would be great! It would be no great loss if I had to reinstall it since I'll be moving to a totally new PC anyway, but I'd like to try and save this install anyway.

you are viewing a single comment's thread
view the rest of the comments

[–] empireOfLove@lemmy.one 3 points 1 year ago (1 children)

yeah it hangs way before the login screen. It basically hangs immediately after exiting GRUB and goes directly to a flashing cursor.

elltee explained it above.. MX Linux's stable distribution is on kernel 5.10 and I need kernel 6.x (part of their advanced hardware support release) to get AMD RDNA3 drivers. So I'll most likely be doing a full reinstall unless you know how to replace kernels in place.

[–] INeedMana@lemmy.world 1 points 1 year ago (1 children)

I have no idea what MX is but maybe you could just compile your own? It's not that hard. If you're going to wipe the system anyway, it's an opportunity to mess around a little and learn

Just remember to

backup old kernel AND initrd
have a rescue usb in case it completely stops booting up
choose modules that are used for your hard drive and filesystem as built into the kernel, just in case
you should be able to copy the CONFIG of the old kernel in the repo and use it (as the wiki proposes)
remember to sleep

[–] empireOfLove@lemmy.one 2 points 1 year ago (1 children)

Not sure I'm feeling adventurous enough to be compiling my own kernel at this stage in the game. I might do that for some of my homelab machines as an experiment but my main computer really needs to be drop-in and go with full stability.

[–] targetx@programming.dev 1 points 1 year ago

You should be able to boot into runlevel 1 easily and upgrade the kernel using the steps someone else already mentioned. No reason to reinstall the entire system.