this post was submitted on 06 Oct 2023
5 points (100.0% liked)

Synology

965 readers
1 users here now

Synology

This is a place for all topics regarding Synology hard- and software - especially (but not limited to) their NAS devices.

Just one thing: Let’s please be pleasant to each other and respect that people have different experience levels. Some are pros, some are noobs, yet everybody may have good ideas or interesting questions to ask and comments to make, and all of these shall be heard and appreciated. ❤️

And since we know from TV that all IT nerds 🤓 are h4xx0rs and wear hoodies all the time (if not even ski masks) in front of their computers, I chose an appropriate banner image (image credit).

founded 1 year ago
MODERATORS
bubu@feddit.de
5
Can I restore my files from half my 2-drive RAID? (lemmy.ca)
submitted 1 year ago by andykm@lemmy.ca to c/synology@feddit.de
10 comments fedilink hide all child comments
 

I have a DS220+ with 2x 6TB drives in RAID. I used some bad RAM, and now the volume is read-only and won't restore. I was resigned to backup the data, create a new volume, and restore the data, but I had an idea -- will this work?: Basically, I use one of the two drives as its own backup. I pull out one drive and save it, I wipe the other drive and create a new volume, then pop in the drive with files from the old volume, and copy the files over, and then recreate the RAID. Should that work? Any obstacles I should watch for?

you are viewing a single comment's thread
view the rest of the comments
[–] bucho@lemmy.one 7 points 1 year ago (2 children)

Is it RAID0, or RAID1? If it's the former, you're fucked. No problem if RAID1.

[–] Raptor_007@lemmy.world 5 points 1 year ago

Yeah that’s the really important detail here for sure

[–] andykm@lemmy.ca 1 points 1 year ago (2 children)

I'm like 99% sure it's RAID1, but it might be SHR. I'm sure it's not RAID0.

[–] bucho@lemmy.one 3 points 1 year ago (1 children)

Quick way to tell: when it was functioning, did it appear as a 6, or a 12 TB drive? If it appeared as 12, that means you were using RAID 0.

[–] andykm@lemmy.ca 1 points 1 year ago

It's RAID1

[–] Golther@infosec.pub 2 points 1 year ago (1 children)

Did you have 6tb or 12tb storage available?

[–] andykm@lemmy.ca 1 points 1 year ago (1 children)

6TB

[–] Golther@infosec.pub 1 points 1 year ago

Barring some messed up partitions, you should have been using RAID 1.