Home Improvement

9030 readers

2 users here now

Home Improvement

founded 1 year ago

MODERATORS

nichos@lemmy.world

nieceandtows@lemmy.world

Confound4082@lemmy.ml

nieceandtows@programming.dev

Dear Ryobi Haters (lemmy.fmhy.ml)

submitted 1 year ago by Overexert1126@lemmy.fmhy.ml to c/homeimprovement@lemmy.world

28 comments fedilink hide all child comments

I just cut through a 6x6 pressure treated beam with my Ryobi brushless circular saw. Didn't even bother to upgrade to a diablo blade. And it worked great!

I made six more similar cuts. No problem.

If I was doing this every day, would I upgrade to Milwaukee? Probably. (More than likely buy a corded saw.) But for weekend home improvement projects, don't doubt the power!

you are viewing a single comment's thread
view the rest of the comments

[–] Confound4082@vlemmy.net 2 points 1 year ago (1 children)

After borrowing a friends Hilti TE24 hammer drill i bought one on ebay and will never use a smaller one again.

[–] infinitevalence 1 points 1 year ago (1 children)

Hilti is top teir, if I was working as a professional in construction I would probably invest in their tools over Milwaukee, same with Makita . I used to use lots of Hilti for powder actuated fasteners when I did commercial networking and fiber-optic infrastructure installation.

[–] Confound4082@vlemmy.net 1 points 1 year ago

They are famtastic, and used prices on eBay moved them into my budget.

My most recent project was fencing about 5.5 acres in, about 500ft of the fence line was on a rock shelf. tposts have a hard time being drove by hand into boulders. I used a 1" x 18" bit to drill all but two of the posts on that side.