Mechanical Keyboards

8846 readers

1 users here now

Are you addicted to the clicking sounds of your beautiful and impressive mechanical keyboard?
If so, this community is for you!

Here you can discuss everything about mechanical keyboards (and only mechanical keyboards).

Banner by Jay Zhang on Unsplash

founded 4 years ago

I want a proper mech keyboard, but I can't be arsed building one. What do I do? (lemmy.ml)

submitted 1 year ago* (last edited 1 year ago) by vettnerk@lemmy.ml to c/mechanicalkeyboards@lemmy.ml

12 comments fedilink hide all child comments

Specifications:

Full size (80ish+ size with a reduced numpad will also work)
ISO key layout (as in, a proper Return key. ANSI can burn)
Numpad
Wireless (if possible)
Don't need any RGB
I don't care about keycaps, so any leftovers will do. They don't even have to be representative of the actual key, random letters and symbols will be fine, even duplicates

When I wasbinto RC Helicopters i liked flying, but didn't get much entertainment feom building. This other guy liked building but didn't care that much about flying. I was hoping to run into someone similar here.

EDIT: The helicopter sory as I posted it elsewhere, in case anyone cares. https://lemmy.ml/comment/2517850

you are viewing a single comment's thread
view the rest of the comments

[–] PepeGodzilla@lemmy.ml 3 points 1 year ago* (last edited 1 year ago)

i think you might overestimate the building part.

If you get a barebones board with a hotwap PCB you have to screw in stabilizers for all keys larger than 2u (=2 keys) - Shift, Enter, Backspace and Space. Since you can't be arsed, screw lubing them. Just screw them in, takes 3 minutes.

Then, place all the switches on Plate and PCB and since they're hotswap you just press them in.

Then place like 8 gaskets or screws, drop on your PCB-Plate-Switch-Sandwitch, screw together top and bottom with 4 more screws.

When you're done, mount the caps, also just pop them in place.

That's it. I reckon it's about as much work as a 10$ Lego set.

But going prebuilt is far easier of course: Unpack, plug in, done. If you get a hotswap you can change switches later on if you fancy.