this post was submitted on 11 Sep 2023
22 points (100.0% liked)

Technology

37719 readers
114 users here now

A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.

Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.

Subcommunities on Beehaw:

This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago
MODERATORS
alyaza@beehaw.org
TheRtRevKaiser@beehaw.org
gyrfalcon@beehaw.org
rs5th@beehaw.org
coldredlight@beehaw.org
Los@beehaw.org
SemioticStandard@beehaw.org
TheRtRevKaiser@kbin.social
remington@beehaw.org
22
Would it be possible (at some point) cool aur by pulling heatenergy from it? (discuss.tchncs.de)
submitted 1 year ago by Haui@discuss.tchncs.de to c/technology@beehaw.org
37 comments fedilink hide all child comments
 

I recently had a discussion about ACs and how they heat up cities.

Then I found an article about theoretical increase of efficiency of acs by using the heat pulled from a room to run a thermoelectric device and getting some of the energy back that was used in the ac.

I‘ve had this downstream thought many times already: since hot air is basically just energy stored. Could we theoretically pull (all?) the energy from the air (depending on desired temp) to cool it and casually fuel our society’s energy needs?

you are viewing a single comment's thread
view the rest of the comments
[–] Hacksaw@lemmy.ca 1 points 1 year ago (1 children)

Sounds like you're on the right track there. As far as energy goes, you're right, when things are dissipated, or all the same, you can't extract anything. You need a differential, like a hot place and a cold one, a high voltage and a low one, a fast object and a slow/stopped one, a high object and a low one. The higher the differential the more you're going to be able to extract. If it's too small you might not be able to get any useful work out at all.

[–] Haui@discuss.tchncs.de 1 points 1 year ago

Thanks! That’s good to hear.