this post was submitted on 18 Jan 2025
106 points (97.3% liked)

Climate - truthful information about climate, related activism and politics.

5519 readers
234 users here now

Discussion of climate, how it is changing, activism around that, the politics, and the energy systems change we need in order to stabilize things.

As a starting point, the burning of fossil fuels, and to a lesser extent deforestation and release of methane are responsible for the warming in recent decades: Graph of temperature as observed with significant warming, and simulated without added greenhouse gases and other anthropogentic changes, which shows no significant warming

How much each change to the atmosphere has warmed the world: IPCC AR6 Figure 2 - Thee bar charts: first chart: how much each gas has warmed the world. About 1C of total warming. Second chart: about 1.5C of total warming from well-mixed greenhouse gases, offset by 0.4C of cooling from aerosols and negligible influence from changes to solar output, volcanoes, and internal variability. Third chart: about 1.25C of warming from CO2, 0.5C from methane, and a bunch more in small quantities from other gases. About 0.5C of cooling with large error bars from SO2.

Recommended actions to cut greenhouse gas emissions in the near future:

Anti-science, inactivism, and unsupported conspiracy theories are not ok here.

founded 2 years ago
MODERATORS
silence7@slrpnk.net
106
How smaller, more affordable electric cars can accelerate the green transition (theconversation.com)
submitted 2 days ago by silence7@slrpnk.net to c/climate@slrpnk.net
43 comments fedilink hide all child comments
you are viewing a single comment's thread
view the rest of the comments
[–] Bitswap@lemmy.world 2 points 17 hours ago

I see you didn't really read what I wrote and are just talking about running a new circuit. That is one of the 3 upgrades I need.

A panel upgrade is not a small operation and I highly doubt anyone could do it in under an hour. A panel upgrade consists of removing all breakers from the panel, disconnecting all wires, disconnecting all conduits from the panel pulling all wires out of the panel, (in my case enlarging the hole in the wall for the new panel), reinserting all wires, attaching conduit, redoing internal panel wiring, and putting breakers back in.

I've done plenty of basic electrical work. Electrical work is not complex, it just takes the knowledge of what is to code and if there are specialty codes for the state, county and/or city. I do not have time to study all the code and plan the upgrade.

Future proofing upgrades is very much in my interest. If I have to touch something or upgrade something...its going to be overdesigned/overbuilt because I don't ever want to have to touch it again.