70
submitted 20 hours ago* (last edited 17 hours ago) by khannie@lemmy.world to c/asklemmy@lemmy.world

Mine have built a decent number of very small scratches and they're getting annoying so I'd like to get rid if at all possible.

I've seen various things suggested including:

  • lens scratch repair kit (reviews don't look great on amazon)
  • baking soda paste
  • non-abrasive toothpaste
  • furniture polish (temporarily fills in the scratch from what I can tell)

I'm reluctant to try any of them without some first hand accounts. No lens coating on these so no worries there.

Thank you in advance!

edit: I just want to say thanks very much to everyone. I ended up getting my prescription emailed to me and buying a new pair for €17 (about $19 USD) delivered on a site that one helpful poster linked. Looks like they will take about 3 weeks to get here so I'll put up with the scratchy ones until they get here.

When they do arrive I will take some pictures and test the various methods I found online then post up what works and what wrecks the lenses.

you are viewing a single comment's thread
view the rest of the comments
[-] zephorah@lemm.ee 5 points 19 hours ago* (last edited 19 hours ago)

You pay more initially, and have to look around more for it, but glass lenses hold up. Drop them. Stick them in your pocket with your car keys and pens. Clean them with whatever. Lose the case on day one. And they stay scratch free. For years.

Granted, this is only tenable if you have a “lighter” prescription.

I remove mine for close up stuff and thus my prescription has remained the same for over 20 years. I get new glasses not because the lenses scratch up, but because the frames break. I average new glasses every 8-10yrs.

Glass lenses.

[-] ramenshaman@lemmy.world 3 points 16 hours ago

I've never even been offered glass lenses. I thought they were phased out so that people would never get broken glass in their eyes.

[-] zephorah@lemm.ee 2 points 8 hours ago

I’m been smacked in the face and dropped them multiple times on concrete, industrial linoleum tile, and hardwoods. Never even seen a crack. I’m sure there are things that can do so, like an airbag exploding in your face, but I can’t imagine shattered broken milled plastic not being dangerous as well.

You have to ask for glass. They bury it in favor of the garbage that scratches up over time.

[-] Cenotaph@mander.xyz 2 points 18 hours ago

Quality plastic lenses can last that long. Often being able to keep glasses that long depends most on the stability of your prescription, and not going for bottom of the barrel coatings.

Glass lenses are harder to scratch, but are heavier for the same prescription and if you get hit in the face can shatter into shards that are quite damaging to the eyes.

If getting hit in the face is not a risk for you and you dont mind the extra weight go for it, but it's worth noting there are some downsides as well.

[-] zephorah@lemm.ee 1 points 8 hours ago

That’s why I said it depends on how light your prescription is. The husband has coke bottle lenses and cannot do glass. But he has to use the case. He has to use a special cloth to clean the lenses. He has to check against cleaning chemicals. He has to be very careful or they scratch, doesn’t matter what “special coating” is there. Those lenses do scratch up.

I’m less than -2 in both eyes so the weight doesn’t matter so much for me. I drop mine on the (bacterial lava) floor of a patient care area and I can grab whatever industrial, don’t use bare hands, wipe is available to purge the lenses of bacterial and viral load. And then stick them loose in a pocket with keys, pens, loose change, scissors, and they come out after a couple hours of that scratch free.

I get hit in the face. For decades. And decades of dropping them on concrete and everywhere else. No issues, breaks, or scratches thus far.

What are the stats on that? Are they a reality for the curved milled glass lens? Or is it a falsehood used to sell planned obsolescence lenses?

[-] ColeSloth@discuss.tchncs.de 0 points 11 hours ago

Lol. Bullshit to quality plastic lenses last that long. I mean sure, if you never drop them and baby the heck out of them.

The hardest clear plastic isn't remotely close to being as hard as glass or sapphire.

As for the shatter thing, often glass lenses will have a plastic layer on the eyes side of the lenses that prevents shards. This does mean that the inside of your glasses will scratch easier than the outside, but the outside is what always gets abuse.

[-] Cenotaph@mander.xyz 1 points 11 hours ago

Not all plastics are made equal. Two different 1.5 or 1.6 index plastics from different manufacturers will have different scratch resistance as well as different levels of aberration depending on how good their materials science is.

All plastic is softer than glass, yes, which is why any plastic lens you get has a hardcoat to reduce scratching and if it is from a quality lab, a scratch/antireflective coat as well.

If you've never had plastic lenses last very long, where you are sourcing them from is using inferior quality plastics with whichever lab partner they use. That or you a) leave them in a hot car and the heat damages them b) constantly leave them lens-face down on the table

But I have had people with very stable prescriptions keep plastic lenses in good condition for 15-20 years in extreme cases.

Laminated glass treatments may be used, but because they cause problems with the cutting machinery it is far more common in optical glass lenses to see chemical or heat treating. If these are done well, they can be quite resistant to shattering. This, however, really comes down to the individual skill of the person treating your lens and I've seen enough damaged eyes to be wary of them.

Another reason many labs have moved away from mineral lenses entirely is that they shatter when being cut to shape for your glasses, posing greater risk to the one doing the edging and significantly greater cost to the lab. Depending on the complexity of prescription they may shatter up to 3 or 4 times before one cuts properly into shape.

To add onto this, if you are using progressive glasses, you are certainly getting an inferior product as no lab I'm familiar with puts their new progressive designs into mineral. The majority only have designs from 15-20 years ago with terrible intermediate segments.

this post was submitted on 03 Oct 2024
70 points (100.0% liked)

Ask Lemmy

26350 readers
946 users here now

A Fediverse community for open-ended, thought provoking questions


Rules: (interactive)


1) Be nice and; have funDoxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them


2) All posts must end with a '?'This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?


3) No spamPlease do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.


4) NSFW is okay, within reasonJust remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either !asklemmyafterdark@lemmy.world or !asklemmynsfw@lemmynsfw.com. NSFW comments should be restricted to posts tagged [NSFW].


5) This is not a support community.
It is not a place for 'how do I?', type questions. If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email info@lemmy.world. For other questions check our partnered communities list, or use the search function.


Reminder: The terms of service apply here too.

Partnered Communities:

Tech Support

No Stupid Questions

You Should Know

Reddit

Jokes

Ask Ouija


Logo design credit goes to: tubbadu


founded 1 year ago
MODERATORS