this post was submitted on 17 Aug 2024
16 points (100.0% liked)

3DPrinting

15595 readers
117 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
j4k3@lemmy.world
andypiper@lemmy.world
henry_rowengartner@lemmy.world
GrayBackgroundMusic@lemm.ee
16
[Help] My Ender 3 isn't powering the extruder motor. Do I need a new motherboard? (lemmy.blahaj.zone)
submitted 3 months ago by misophonium@lemmy.blahaj.zone to c/3dprinting@lemmy.world
5 comments fedilink hide all child comments
 

The extruder suddenly stopped working after I cleared a jam that caused it to grind.

  • I tried every combination of motor and cable to trace the problem. It seems the only fault is the extruder's motherboard connector.

  • The motor is functional. I connected it to the XYZ motor cables and it spins on every one.

  • Nothing happened when I tried plugging the other axis cables into the extruder port on the motherboard.

  • Finally, I am comfortable using a multimeter and soldering iron, but don't have immediate access to them.

I really appreciate any advice on this because I miss printing!

you are viewing a single comment's thread
view the rest of the comments
[–] roofuskit@lemmy.world 5 points 3 months ago* (last edited 2 months ago) (1 children)

I'm assuming this is a stock motherboard with motor drivers soldered directly to the board without daughter boards and sockets?

Without digging in deeper it sounds like your motor driver is dead. If it's a stock board you need to replace the entire thing. If you don't already own a soldering iron and multi-meter then we can skip past the fantasy that you could replace a surface mount stepper driver yourself.

Good news is replacement boards are very cheap. There are great replacement options from both Creality and BigTreeTech. I would go with one of the drop in options, BTT will have E3 in the name. If you're feeling more adventurous and don't mind putting in more time and effort you can get a non-drop in board that has sockets instead of hard wired stepper drivers. That would allow you to drop in a replacement driver if this happens again. However it's going to take significantly more effort, especially on the software side, before you get your printer running again.

Also, my advice is if you're going to own a complex hobby electronics device like an Ender 3 you need to own your own multi meter.

[–] ExcessShiv@lemmy.dbzer0.com 3 points 3 months ago (1 children)

we can skip past the fantasy that you could replace a surface mount stepper driver yourself.

The MBs on these cheap printers are usually so cheap it isn't worth the hassle, even if you have the skills and tools.

[–] roofuskit@lemmy.world 2 points 3 months ago

I only brought it up because they brought up the soldering iron in their post. I could probably replace one of those surface mount drivers, but I also wouldn't. Not when you can buy a whole board for $20usd.