homeassistant

12066 readers

12 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago

MODERATORS

GreatAlbatross@feddit.uk

103

Don't forget Temperature Sensors for your Fridge! (lemmy.world)

submitted 1 year ago* (last edited 1 year ago) by ArmoredCavalry@lemmy.world to c/homeassistant@lemmy.world

39 comments fedilink hide all child comments

Learned my lesson after a trip last week... I have sensors for nearly everything, but somehow totally forgot about the Fridge / Freezer.

A power outage made my fridge lose it's mind and turn off cooling, even after it powered back up. Unplug / replug seems to have fixed it, but all the food was spoiled when we got home. Simple $10 temperature sensor could have saved everything!

you are viewing a single comment's thread
view the rest of the comments

[–] Nawor3565@lemmy.blahaj.zone 8 points 1 year ago (3 children)

I've been wanting to do this for awhile after having problems with the cooling coils freezing over. My question is, what sensor would you use for this? A battery-powered one would need to be recharged and a wire running into the fridge would break the seal

[–] ArmoredCavalry@lemmy.world 5 points 1 year ago* (last edited 1 year ago) (1 children)

These are the ones I got, just because they are only $9 each, with a display as well. Each one has 2x AAA battery, so I'd expect they'll last quite a while. HA also reports on battery level - https://www.amazon.com/dp/B0872X4H4J

They are bluetooth, but I already had an ESP32 for other sensors. Seems to work great w/ Home Assistant / ESPHome so far!

[–] Another_Reddit_Refugee@lemmy.world 3 points 1 year ago (1 children)

I currently have a similar setup (ESP32, BLE Sensors with ESPHome). Only problem is my sensors are Cr2032 and they go through a shit ton of batteries.

Is there a write up somewhere on how to get these working? I’d like to replace all mine!

[–] ArmoredCavalry@lemmy.world 2 points 1 year ago

If you already have ESPHome and Bluetooth proxies setup, the Govee sensors should be auto discovered by Home Assistant as soon as you put the batteries in!

It is the Govee Bluetooth integration, I was actually amazed how simple the setup was. Didn't even have to install the Govee app. Definitely give them a try, the price is right!

[–] redcalcium@lemmy.institute 3 points 1 year ago

I bought a battery-powered (2xAAA) zigbee temperature/humidity sensor about 6 months ago and haven't replaced its batteries yet.

[–] wildbus8979@sh.itjust.works 2 points 1 year ago

A battery powered ZigBee one should last for at least a year...