Apple

17491 readers

96 users here now

Welcome

to the largest Apple community on Lemmy. This is the place where we talk about everything Apple, from iOS to the exciting upcoming Apple Vision Pro. Feel free to join the discussion!

Rules:

No NSFW Content
No Hate Speech or Personal Attacks
No Ads / Spamming
Self promotion is only allowed in the pinned monthly thread

Lemmy Code of Conduct

Communities of Interest:

Apple Hardware
Apple TV
Apple Watch
iPad
iPhone
Mac
Vintage Apple

Apple Software
iOS
iPadOS
macOS
tvOS
watchOS
Shortcuts
Xcode

Community banner courtesy of u/Antsomnia.

founded 1 year ago

MODERATORS

MichelleG@lemmy.world

RoyalEngineering@lemmy.world

thisisdee@lemmy.world

Apple TV remote keeps needing to be reset (lemmy.radio)

submitted 4 months ago by vk6flab@lemmy.radio to c/apple_enthusiast@lemmy.world

8 comments fedilink hide all child comments

My search has been without results.

My "new" model remote with a Siri button keeps needing to be reset to control my infrared amplifier. Press and hold the Volume Down and TV button works, but it's annoying when you want to change the volume whilst watching something and it doesn't respond.

Firmware version is 0x83.

Anyone got any ideas what might be causing this?

top 8 comments

sorted by: hot top controversial new old

[–] bananaa@lemmy.world 4 points 4 months ago (1 children)

I’ve had this issue ever since I got one of the latest model a year ago. Need to reset it like once a month.

A factory reset didn’t fix it :/

And I have another Apple TV 4K which is one generation old that’s never had the problem.

[–] vk6flab@lemmy.radio 1 points 4 months ago

That's interesting.

The Apple TV is the First generation 4K model with 64 GB (Model: A1842)

Source: https://support.apple.com/en-us/101605

We bought the new remote because we thought we could use two remotes simultaneously, which turned out to be poor documentation.

[–] Cornpop@lemmy.world 3 points 4 months ago

Same issue

[–] reddig33@lemmy.world 2 points 4 months ago* (last edited 4 months ago)

The firmware on the remote was supposed to update after updating the AppleTV. I guess the update didn’t fix it. Pressing TV and volume down for a few seconds restarts the remote which usually fixes it for a while.

https://support.apple.com/en-us/108769

[–] Hux@lemmy.ml 0 points 4 months ago (1 children)

Does your amp support CEC? If so, you could make sure it is turned on for both ATV and the amp and just use the “HDMI” setting in the ATV settings.

Also, just to confirm—in the ATV’s remote>volume control settings, do you have it set to control the receiver via IR?

[–] vk6flab@lemmy.radio 1 points 4 months ago (1 children)

The amplifier is not connected via HDMI and does not support CEC.

The ATV is configured to use IR to control the amplifier.

[–] borari@lemmy.dbzer0.com 1 points 4 months ago (1 children)

I’ve noticed this happens when I click volume up or down repeatedly a lot of times in rapid succession instead of just holding the button down. It hasn’t happened to me since I’ve tried to be conscientious about it, but ymmv.

[–] vk6flab@lemmy.radio 2 points 4 months ago

Wow..

..okay I'll try that and see what gives.