He obviously is right! I have a mechanical keyboard because it transmits better key presses. Aviator connector helps reduce the noise as well.
this post was submitted on 15 Dec 2024
321 points (98.2% liked)
Confidently Incorrect
4040 readers
2 users here now
When people are way too smug about their wrong answer.
Posting guidelines.
All posts in this community have come from elsewhere, it is not original content, the poster in this community is not OP. The person who posts in this community isn’t necessarily endorsing whatever the post is talking about and they are not looking to argue with you about the content in the post.
You are welcome to discuss and debate any topic but arguments are not welcome here. I consider debate/discussions to be civil; people with different opinions participating in respectful conversations. It becomes an argument as soon as someone becomes aggressive, nasty, insulting or just plain unpleasant. Report argumentative comments, then ignore them.
There is currently no rule about how recent a post needs to be because the community is about the comeback part, not the topic.
Rules:
• Be civil and remember the human.
• No trolling, insults or name calling. Swearing in general is fine, but not to insult someone.
• No bigotry of any kind, including homophobia, transphobia, sexism and racism.
• You are welcome to discuss and debate any topic but arguments are not welcome here. I consider debate/discussions to be civil; people with different opinions participating in respectful conversations. It becomes an argument as soon as someone becomes aggressive, nasty, insulting or just plain unpleasant. Report argumentative comments, then ignore them.
• Try not to get too political. A lot of these posts will involve politics, but this isn’t the place for political arguments.
• Participate in good faith - don’t be aggressive and don’t argue for arguements sake.
• Mark NSFW posts if they contain nudity.
• Satire is allowed but please start the post title with [satire] so other users can filter it out if they’d like.
Please report comments that break site or community rules to the mods. If you break the rules you’ll receive one warning before being banned from this community.
This community follows the rules of the lemmy.world instance and the lemmy.org code of conduct. I’ve summarised them here:
- Be civil, remember the human.
- No insulting or harassing other members. That includes name calling.
- Respect differences of opinion. Civil discussion/debate is fine, arguing is not. Criticise ideas, not people.
- Keep unrequested/unstructured critique to a minimum.
- Remember we have all chosen to be here voluntarily. Respect the spent time and effort people have spent creating posts in order to share something they find amusing with you.
- Swearing in general is fine, swearing to insult another commenter isn’t.
- No racism, sexism, homophobia, transphobia, xenophobia or any other type of bigotry.
- No incitement of violence or promotion of violent ideologies.
founded 1 year ago
MODERATORS
Einbildung ist auch eine Bildung!
Hahahaha, that's a good one. I'll be using that
Strictly speaking, as soon as an analog signal is quantized into digital samples there is loss, both in the amplitude domain (a value of infinite precision is turned into a value that must fit in a specific number of bits, hence of finited precision) and on the time domain (digitalization samples the analog input at specific time intervals, whilst the analog input itself is a continuous wave).
That said, whether that is noticeable if the sampling rate and bits per sample are high enough is a whole different thing.
Ultra high frequency sounds might be missing or mangled at a 44.7 kHz sampling rather (a pretty standard one and used in CDs) but that should only be noticeable to people who can hear sounds above 22.35kHz (who are rare since people usually only hear sounds up to around 20kHz, the oldest the person the worse it gets) and maybe a sharp ear can spot the error in sampling at 24 bit, even though its miniscule (1/2^24 of the sampling range assuming the sampling has a linear distribution of values) but its quite unlikely.
That said, some kinds of trickery and processing used to make "more sound" (in the sense of how most people perceive the sound quality rather than strictly measured in Phsysics terms) fit in fewer bits or fewer samples per second in a way that most people don't notice might be noticeable for some people.
Remember most of what we use now is anchored in work done way back when every byte counted, so a lot of the choices were dictated by things like "fit an LP as unencoded audio files - quite luterallyplain PCM, same as in Wav files - on the available data space of a CD" so it's not going to be ultra high quality fit for the people at the upper ends of human sound perception.
All this to say that FLAC encoded audio files do have losses versus analog, not because of the encoding itself but because Analog to Digital conversion is by its own nature a process were precision is lost even if done without any extra audio or data handling process that might distort the audio samples even further, plus generally the whole thing is done at sampling rates and data precision's fit for the average human rather than people at the upper end of the sound perception range.
When we talk about lossless in the audio encoding world, we aren't comparing directly with the analog wave, as there will always be loss when storing an analog signal in a digital machine. Lossless formats are compared to pure PCM, which is the uncompressed way of representing a waveform in bits.
With audio, every step you take to transform it, capture it, move it or store it, even while working with the analog waveform, degrades it. Even by picking it up with a microphone you're already degrading the waveform. However, generally, the official release CDs or WebDLs are considered the original, lossless, master file. Everything that manages to keep that exact waveform is lossless (FLAC, AIFF, WAV, ALAC...), and everything that distorts it further is considered lossy (MP3, AAC, OPUS...).
Additionally, a "bad transcode" (which is a transcode that involves lossy formats somewhere that isn't the last step) is also considered lossy, for obvious reason. Transcoding FLAC to MP3 to WAV stores the exact same waveform that MP3 made, as it is the lowest common denominator, even though the audio is stored as WAV in its final form.
Transcoding between lossy formats also loses more data, even if the final lossy format can store more bits or is more accurate than the original. This is one of the main problems with lossy codecs. MP3 192kbps to MP3 320kbps will lose information, just like MP3 to AAC. That's why, normally, we use a lossless file and transcode it to every lossy format (FLAC to MP3, then FLAC to AAC...). This way you're not losing more than what the lossy format already loses.
load more comments
(12 replies)