Cars - For Car Enthusiasts

3918 readers

54 users here now

About Community

c/Cars is the largest automotive enthusiast community on Lemmy and the fediverse. We're your central hub for vehicle-related discussion, industry news, reviews, projects, DIY guides, advice, stories, and more.

Rules

Stay respectful to the community, hold civil discussions, even when others hold opinions that may differ from yours.

This is not an NSFW community, and any such content will not be tolerated.

Policy, not politics! Policy discussions revolve around the concept; political discussions revolve around the individual, party, association, etc. We only allow POLICY discussions and political discussions should go to c/politics.

Must be related to cars, anything that does not have connection to cars will be considered spam/irrelevant and is subject to removal.

founded 1 year ago

MODERATORS

BallShapedMan@lemmy.world

RightHandOfIkaros@lemmy.world

Ask Cars: Valve cover gasket replacement (lemmy.world)

submitted 8 months ago by ido@lemmy.world to c/cars@lemmy.world

21 comments fedilink hide all child comments

Hello! I own a 08 Acura TL that has an oil leak from a bad valve cover gasket. I took it to my mechanic for some other things, but also wanted a quote for a replacement. The number they gave me was too high for my liking, and I did some research and decided to attempt the replacement myself. The shop would've done a spark plug replacement as well, so I also plan to do that. My issue is I have never done work on a car, not even an oil change. In total so far, I need 2 sets of valve cover gaskets, spark plugs, an intake plenum gasket, and maybe an air filter boot (since I've heard they have a tendency to crack, if anyone has a good source please let me know). What other parts should I preventatively replace, and what are the normal steps to working on the top of the engine?

you are viewing a single comment's thread
view the rest of the comments

[–] Ebby@lemmy.ssba.com 3 points 8 months ago* (last edited 8 months ago) (2 children)

Done this (kinda) before on a accord V6 so basically the same engine. Have to take the manifold off which is pretty straightforward. Don't drop anything inside or you'll have a bad day. Gaskets are pretty easy. Know your torque specs when you reassemble. Different bolts have different loads.

Spark plugs are right there too. Don't over crank or you'll have a bad day. These engines use coil-on-plug, so you don't have to replace wires. The ECU will tell you if it misfires anyway. Do not do not do not cheap out on spark plugs and get some crap Bosch bs to save a few bucks. Why do I know? It's called plug ejection and it leaves you stranded on the side of the road. The spark plug takes the cylinder threads with it as it's launched into space. I replaced all the plugs and 3 others were broken in some way. Don't be like me. Slapped NGK plugs in and not a problem since. Stick with those.

I will mention it would be a great time to check/adjust valve clearances especially if you are around 200,000 miles. Mine needed it pretty bad.

Upgrade-wise there is a manifold spacer which supposedly increases torque. Kinda wish I did that then (new gaskets needed) but I thought my car was on its last leg so I didn't want to throw cash at it. Surprise, reliable ever since.

Oh, and there is a gasket on the throttle body that is easy to tear. Be gentle and you can reuse it.

[–] ido@lemmy.world 1 points 8 months ago (1 children)

I'm interested in this manifold spacer, do you have any more info on that? What would checking the clearances entail?

[–] vivavideri@lemmy.world 1 points 8 months ago

Feeler gauge tool, wrench/screwdriver, and a cheat sheet of what position your crankshaft is in for each valve. You turn it a little to open/shut the valves so they're in the right spot to check the clearance.