Just finished building this beast. It's a ratrig Vcore 3.1 with a 500x500x500mm build volume and blazing speed.
this post was submitted on 12 Jun 2023
63 points (100.0% liked)
3DPrinting
15600 readers
291 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Wow. I guess you use larger nozzles for something like that? How do you get an extruder to keep up with the flow rate? Also, this is my first post on Lemmy.
On my VC3 500 I use a rapido with a 0.4mm. My default PLA settings are 300mms with 10kmms2 acceleration. I'm not sure about OP but for me the larger build volume lets me kick off a full plate of parts and come back a few hours later. Gets pretty good quality but at that size/weight you do get some ringing on the parts.
Ayy another vc3500 haver. I use a .6mm bondtech CHT volcano, but honestly I've been having trouble getting past 30mm^3 per second, which is unfortunate. My main goal with it is actually giant parts, but the mass production thing is pretty cool too.
North of ~25mm^3 I've found I need to really up the temps to keep up with PLA (mainly using eSun) which then also means a lot more cooling. I managed a pretty decent 14 minute benchy but need to retest as I've upgraded my cooling.
My current setup for extrusion:
Mine is basically the ratrig recommended defaults except for the CHT, a beacon scanner, and a carbon fiber rail. I got to a 16 minute benchy basically immediately, but anything else I print that fast causes either skipped steps or belt slips and I'm not sure why.
Nice not bad! A pretty easy upgrade for power (if you have a mainboard that supports it) is to go to 48v for the steppers with 5160 step sticks, gobs more power, but you are also now getting to territory where a crash can start really breaking stuff. There is also a group in the discord where they are working on the AWD mod to add 2 more steppers to the XY motion allowing for insane speeds.
Oh so that's what AWD is? Sounds cool. For me though, my issue is probably down to belt tension.