I apologize if this isn’t the correct community ask, but i was hoping for a bit of help getting this frame cleaned up.

My wife and I picked this piece up today. There’s some water damage and i’m wondering what the best way to clean the fabric matting would be or if we should get it replaced.

For those curious it looks like the artist is Edward Aldrich. We think its an oil painting and from the date we’re guessing its from 97.

Thanks everyone!

P.S. I took a look through the community and the art here is amazing!

Thank you guys for pointing out the vref issue in my last post! I got it adjusted, and they were all fairly high so now they should be dialed in. While I was in there, I figured I should probably calibrate the extrusion steps as well.

I’ve got a couple larger projects coming down the pipeline. But if I can go off of this cube, I think I’ll be in good shape.

I left the print over the weekend and I came back to spaghetti. It looks like something, caused the printer to push the print off its base like it was a poorly leveled bed?

I still have to watch the camera footage to see what failed, but I hope you guys get a chuckle out of the spaghetti monster like I did.

Hi everyone!

I'm curious to know which slicer you guys use.

I've been using the Creality slicer, but it seems like it pretty consistently crashes, and I've tried Cura but the print seemed stringy despite using the same settings.

How are Orca or Prusa?

Does this hobby ever get easier or is it always like getting kicked in the nuts by Ronaldo?

Filament some how leaked up and burned on. I just don’t have it in me to keep tinkering. I just want to print

Is there any reason that little silver part of the extruder wouldn’t move and start clicking while printing when printing at 205 in PLA. It seems to turn just fine without any filament in there otherwise.

I cleaned out a nozzle clog, but is it possible there’s junk in the hot end stuck?

Resolution: Thanks for your help everyone! It ended up being a nozzle clog that I didn’t get all the way out. I ended up heating the printer up and doing the cool down trick. That seemed to work as a last ditch effort before buying a new nozzle.

I recently picked up a PC and decided to give the original fallout game a try. Do you guys have any tips or tricks I should know before I get started?

Hi all! I was curious to see if anyone had any recommendations for an enclosure for the Ender V3 Neo. I found a few on Amazon, but they look like grow tents and wasn’t sure if that would work well. For a bit of context, it seems like an enclosure is a must have for ABS printing which is ultimately what I’m after.

Thanks everyone!

I recently picked up an Ender 3 V2 Neo at auction. All the pictures looks great, I was told it functioned, and I saw some pictures of it put together.

Long story short either they didn't include the bolts to mount the screen/gantry or kept them.

Does anyone know what screen bolts and gantry mounting bolts I need? Thanks in advance!

It looks like we have a couple perks, but is it going to be viable until the late game?

We loaded up the Hunter 170 today to see how she would sail when loaded down with camping gear in preparation for next weekend’s trip to the Apostle Islands.

My wife is still a bit nervous, but feeling much more confident after today. Please ignore the watering can. She wanted to put a bit more weight onboard just in case.